Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Ihimer adds to skid steer line-up
    April 20, 2012
    Ihimer, the joint venture between Japanese company IHI and Italian firm Imer, has added two skid steer loaders to its growing range of compact equipment. The AS30 and AS34 have operating weights of 3,150kg and 3,500kg respectively, with rated working loads of 850kg and 1,020kg. Power comes from a 50kW Kubota engine in the smaller machine and a 61kW Yanmar motor in the AS34. The company already has a smaller AS12 model, and will launch AS18 and AS22 skid steers at next year’s Bauma show in Munich. IHI also b
    Read More
  • New Indeco multiprocessor
    April 20, 2016
    Indeco has redesigned its multiprocessor, giving it a more robust body, increasing the size of the jaw opening and improving the geometries of the various jaws. The range has also been modified and extended. The IMP multiprocessor’s pulverizer version now has interchangeable teeth. The shear version has the same features as the ISS Series Indeco shear: reversible and interchangeable cutters, and a dual-profile piercing system.
    Read More
  • Custom solutions from GKN Land systems go on show at Conexpo 2014
    March 6, 2014
    GKN Land Systems has developed a high capacity hub and spindle solution for a pan scraper manufacturer looking to update its two-model range. “Our challenge was to go from a four-tyre to a two-tyre axle system, and give the OEM an option to provide different size wheel and tyre packages for its customers,” said Len Hensel, GKN Land systems’ chief engineer for wheels in the Americas. “The development of higher load capacity hub systems for this application led to the creation of a solution in just a few mo
    Read More
  • Austria's new tunnel meets safety regulations
    July 13, 2012
    New safety regulations and high traffic volumes require new tunnel construction all across Europe. Mike Woof reports Anew highway tunnel now being built in Austria will boost traffic volumes and safety standards on a key European route. The existing Pfänder Tunnel lies close to Austria's borders with Germany and Switzerland and carries a heavy traffic volume, so a new parallel tunnel is under construction to help spread this load, increasing capacity as well as safety. Stringent tunnel safety standards have
    Read More

Highlighted Content