Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Atlas Copco’s efficient soil compactors
    March 10, 2016
    Versatility is a key feature of the new Atlas Copco Dynapac CA1400 soil compactor. Designed for compaction operations in pipe trenches, compacting roads, streets, parking lots and pipe trenches. Due to its compact size and manoeuvrability, the model is suited for compaction in cramped spaces in connection with refilling work. Other benefits include manoeuvrability even on steep slopes. Both the D and PD versions are equipped with pads and drum drive, are suitable for the compaction of silt and clay-type
    Read More
  • Atlas Copco’s efficient soil compactors
    January 6, 2017
    Versatility is a key feature of the new Atlas Copco Dynapac CA1400 soil compactor. Designed for compaction operations in pipe trenches, compacting roads, streets, parking lots and pipe trenches. Due to its compact size and manoeuvrability, the model is suited for compaction in cramped spaces in connection with refilling work. Other benefits include manoeuvrability even on steep slopes. Both the D and PD versions are equipped with pads and drum drive, are suitable for the compaction of silt and clay-type
    Read More
  • Tunnelling challenge on German project
    June 13, 2012
    A massive construction project has been underway deep in the heart of the Schnecktal valley area in Germany. From the surface, though, you would never be able to tell. The majority of the work is underground, as a joint-venture team led by German contractor Wayss and Freytag Ingenieurbau builds the nearly 7km long Finne Tunnel. After a few years of tunnel boring operations, the contractor is at work finishing the interior of the tunnel, slipforming first the tunnel’s floor and then a walkway with its GOMACO
    Read More
  • Magna takes to the road on the MA03+ crane tyre
    April 14, 2016
    Magna Tyres Group officially unveiled at bauma its Magna MA03+ crane tyre, specifically for highway and off-road use. The MA03+ is designed for long distance transport and for fuel savings. As well as the economic benefits, this radial constructed tyre is also more comfortable, according to the Dutch manufacturer, located in Waalwijk.
    Read More

Highlighted Content