Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Rototilt celebrates 30th anniversary with additional model
    January 6, 2017
    Rototilt, which is celebrating its 30th anniversary in 2016, is introducing an additional tiltrotator to its line-up, to better suit excavators in the 14-19tonne sector. The R5 has been designed to sit between, and slightly overlap the existing R4 and R6 models, delivering an improved power to weight ratio for mid-range excavators. The attachment features improved castings and hardening techniques that will be integrated into existing models. The R5 can be equipped with an optional smart ICS control system
    Read More
  • Simex unveils GEN II of ART 1000 asphalt regeneration tech
    March 6, 2025

    Simex has released the new GEN II version of its ART 1000 patented technology for in-situ regeneration of deteriorated asphalt.

    Simex ART technology focuses on surface-level interventions for the functional recovery of road deterioration. It does not require the removal of milled material or the addition of virgin bituminous mix, instead utilising only the existing on-site material. Most importantly, it avoids the complete interruption of vehicular traffic, ensuring the road is immediately passable after restoration.

    Read More
  • Wirtgen introduces new concrete slipform pavers
    March 2, 2016
    Wirtgen is expanding its range of slipform pavers with the new SP 60 series and SP 90 series models. The SP 60 models are smaller units designed to be used in a range of applications while the larger SP 90 series suit duties such as highway or runway construction. The SP 60 models include the SP 61i, SP 62i and SP 64i and will replace the earlier SP 500 design. Power comes from a diesel delivering 180kW in Tier 4 Final/Stage IV and 155kW in Tier 3/Stage IIIA emissions ratings. The SP 64i can feature four
    Read More
  • Wirtgen introduces new concrete slipform pavers
    January 6, 2017
    Wirtgen is expanding its range of slipform pavers with the new SP 60 series and SP 90 series models. The SP 60 models are smaller units designed to be used in a range of applications while the larger SP 90 series suit duties such as highway or runway construction. The SP 60 models include the SP 61i, SP 62i and SP 64i and will replace the earlier SP 500 design. Power comes from a diesel delivering 180kW in Tier 4 Final/Stage IV and 155kW in Tier 3/Stage IIIA emissions ratings. The SP 64i can feature four
    Read More

Highlighted Content