Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • HAMM’s novel compaction solution
    February 7, 2017
    HAMM is offering an innovative compaction crushing concept to construction customers - Mike Woof writes HAMM has put its novel crusher drum compactor system in series production. This is based on soil compactor technology, with the key feature being the innovative detachable tools. The idea behind the concept is that a large single drum roller can be used both for crushing and compacting rock. HAMM first unveiled its prototype in 2013 but has been developing and improving the system in a series of trials
    Read More
  • Sheffield duty for a Miller PowerLatch
    June 3, 2019
    The Miller PowerLatch Tilt was recently the attachment of choice for Yorkshire-based engineering consultancy JN Bentley, part of global engineering consultancy Mott MacDonald.
    Read More
  • Cat’s 988K delivers increased loading capability
    January 6, 2017
    Caterpillar’s seventh generation 988 wheeled loader – the 988K – is powered by a Tier 4 Final/Stage IV Cat C18 ACERT diesel engine, featuring selective catalytic reduction and delivering 362kW. The engine is said to deliver a 20% fuel efficiency benefit compared to the 988H, thanks in part to an ECO mode with on-demand throttle, auto idle and engine idle kickdown/auto resume system. The 50tonne machine moves away from its predecessor’s monoboom loader arm design in favour of a Z-bar linkage.
    Read More
  • Cat’s 988K delivers increased loading capability
    April 17, 2013
    Caterpillar’s seventh generation 988 wheeled loader – the 988K – is powered by a Tier 4 Final/Stage IV Cat C18 ACERT diesel engine, featuring selective catalytic reduction and delivering 362kW. The engine is said to deliver a 20% fuel efficiency benefit compared to the 988H, thanks in part to an ECO mode with on-demand throttle, auto idle and engine idle kickdown/auto resume system. The 50tonne machine moves away from its predecessor’s monoboom loader arm design in favour of a Z-bar linkage.
    Read More

Highlighted Content