Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Soilmec unleashes new generation of drilling rigs
    February 26, 2013
    Bauma will be the platform for Soilmec’s next generation of hydraulic drilling rigs for large diameter piles and smaller drilling rigs for micropiles and anchoring. The new rigs have been designed by the ground engineering specialist to improve productivity and operating flexibility and are installed with tier 3 and 4 diesel engines. Powerful and lightweight rotaries have allowed torque levels to increase by up to 20% and the units use high-strength steels. To further improve safety and efficiency, they als
    Read More
  • RDS Technology’s Loadex/Loadmaster weighing systems
    March 14, 2016
    RDS Technology’s retrofittable Loadex 100 excavator weighing system is designed specifically to weigh the contents of a 360° excavator bucket/clamp, while operating in the fastest loading environments. Calculations are made by a smart box using information from a number of sensors installed on the excavator, ensuring the accuracy of the resultant weight information, says RDS Technology. RDS Technology’s Loadmaster a100 weighing system is designed for wheeled, telescopic and tractor-type loaders, and
    Read More
  • RDS Technology’s Loadex/Loadmaster weighing systems
    January 6, 2017
    RDS Technology’s retrofittable Loadex 100 excavator weighing system is designed specifically to weigh the contents of a 360° excavator bucket/clamp, while operating in the fastest loading environments. Calculations are made by a smart box using information from a number of sensors installed on the excavator, ensuring the accuracy of the resultant weight information, says RDS Technology. RDS Technology’s Loadmaster a100 weighing system is designed for wheeled, telescopic and tractor-type loaders, and
    Read More
  • Efficiency foremost for Hyundai HX235 crawler excavator
    March 15, 2016
    Hyundai’s new HX235 LCR short tail crawler excavator, a stage IV generation machine, can load trucks up to 5% faster and levels up to 4% faster than the 9A-Series. To achieve efficient grading, the HX series can apply boom floating control using arm-in and arm-out operation only, allowing stable operation even in high-load work. The new HX235 LCR shares many innovative features with the South Korean manufacturer’s other new excavators – the HX145 short tail crawler excavator and the company’s first w
    Read More

Highlighted Content