Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Speed and precision make for perfect tunnelling combination
    May 21, 2014
    Speed and precision have been the hallmarks of a number of major road tunnelling projects across the globe over the last 12 months, as the latest sector equipment from leading manufacturers has found itself in high demand. Guy Woodford reports Herrenknecht tunnel boring machines (TBM) have been busy tunnelling under major Chinese rivers, demonstrating phenomenal speed, top safety levels and extreme precision while playing a key role in the construction of road tunnels in the Yangtze River Delta. The Yang
    Read More
  • Mecalac MCR6 combines excavator and loader in one machine
    April 22, 2013
    Mecalac Group has introduced the MCR6 compact excavator, first previewed at last year’s Intermat exhibition. A combination of both compact excavator and loader in a single machine, the MCR6 joins the larger MCR8 and MCVR10 in the Mecalac line. Capable of travelling at speeds up to 10km/h, the MCR machines can switch from excavator to loader mode in seconds, providing customers with a highly versatile machine. The MCR6 weighs in at 6tonnes and is powered by a 55kW engine. Maximum tearout force in excavator c
    Read More
  • Mecalac MCR6 combines excavator and loader in one machine
    January 6, 2017
    Mecalac Group has introduced the MCR6 compact excavator, first previewed at last year’s Intermat exhibition. A combination of both compact excavator and loader in a single machine, the MCR6 joins the larger MCR8 and MCVR10 in the Mecalac line. Capable of travelling at speeds up to 10km/h, the MCR machines can switch from excavator to loader mode in seconds, providing customers with a highly versatile machine. The MCR6 weighs in at 6tonnes and is powered by a 55kW engine. Maximum tearout force in excavator c
    Read More
  • New small bridge inspection from Moog
    January 6, 2017
    The new crawler version of Moog’s MBI 50 unit has been designed especially for operation on narrow pedestrian bridges. With the load distribution on two crawlers it is possible to stick to a minimum area load even though the overall width is 1.6m and the weight 3,000kg. This makes it possible to work on bridges that are rated low-weight only.
    Read More

Highlighted Content