Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Advances in tunneling technology offer efficiency
    October 18, 2017
    New developments in tunnelling technologies offer contractors greater efficiencies when constructing new bores. Tunnel boring machines (TBMs) are widely being used in major projects such as the Brenner Base Tunnel in the Austrian Alps. Full face TBMs are highly sophisticated machines featuring a rotating drilling head, which removes the material, and, depending on the type of construction, secures the excavated tunnel with shotcrete, rock bolts and wire mesh or prefabricated segments of reinforced concrete.
    Read More
  • Furukawa Rock Drill extends FXJ breaker series
    March 11, 2016
    Furukawa Rock Drill (FRD) is increasing the performance of its FXJ hydraulic breakers. The firm has increased the power to weight ration due to continuous developments of the FRD Inliner-Systems and various patented solutions. Weight has been reduced breaker while the units offer higher impact energy results for a greater breaking power. From 2016 the FXJ is available in six models for excavators from 9-75tonnes, including two new models, the FXJ125 and FXJ770. The FXJ125, for excavators from 9-16tonn
    Read More
  • Furukawa Rock Drill extends FXJ breaker series
    January 6, 2017
    Furukawa Rock Drill (FRD) is increasing the performance of its FXJ hydraulic breakers. The firm has increased the power to weight ration due to continuous developments of the FRD Inliner-Systems and various patented solutions. Weight has been reduced breaker while the units offer higher impact energy results for a greater breaking power. From 2016 the FXJ is available in six models for excavators from 9-75tonnes, including two new models, the FXJ125 and FXJ770. The FXJ125, for excavators from 9-16tonn
    Read More
  • Mecalac AS900 compact loader at INTERMAT
    April 13, 2012
    Mecalac’s AS900 tele - a rigid chassis all-wheel steer, compact loader - has been given an overhaul for 2012. The 7,250kg machine gets a new cab offering greater visibility, more internal space and quieter in-cab noise levels. A centrally positioned seat affords a clear view of the working environment, with controls integrated into a single joystick. The cab uses two large doors, providing easy access to the cab and with generous soundproofing, the in-cab noise levels have been reduced to 72 dB(A). The
    Read More

Highlighted Content