Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • CNH to build India and Brazil production sites
    April 17, 2013
    CNH is aiming to build new production facilities in India and Brazil for its New Holland Construction and Case Construction Equipment brands. Mario Gasparri, head of the CNH Construction Equipment business for Europe, Africa and the Middle East, said the ambitious moves were based on how CNH sees the evolution of the construction equipment market.
    Read More
  • Terex introduces micro excavator and two reduced radius minis
    January 6, 2017
    Terex launched three compact excavators at INTERMAT – a micro TC10 and the reduced radius TC15 and TC19. All three have been developed in co-operation with an Italian manufacturer. The TC10, which weighs just 1 tonne, has a travel width of 760mm, allowing it to pass through a standard doorway. Hydraulically extending track frames offer a digging width of 990mm for maximum stability.
    Read More
  • Terex introduces micro excavator and two reduced radius minis
    April 17, 2012
    Terex launched three compact excavators at INTERMAT – a micro TC10 and the reduced radius TC15 and TC19. All three have been developed in co-operation with an Italian manufacturer. The TC10, which weighs just 1 tonne, has a travel width of 760mm, allowing it to pass through a standard doorway. Hydraulically extending track frames offer a digging width of 990mm for maximum stability.
    Read More
  • Simex: Road Maintenance
    October 26, 2023
    In the world of road maintenance and paving, as well as construction, the issue of recovering material deriving from demolition and scarification is becoming increasingly urgent, with the dual objective of combining environmental protection with economic savings. Those who work in the sector are well aware of the huge costs of transporting and disposing of asphalt and material from demolition, as well as the costs for the purchase and transport of new raw materials to the site. Now, as never before, the sector features its own circular economy, particularly in regards to bituminous conglomerates: road paving can be recycled several times, in full compliance with the regulations in force.
    Read More

Highlighted Content