Simex’s TF 800/V rotary cutters

Italian firm Simex has produced a new TF 800/V rotary cutter for tunnel excavation applications. Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.
January 6, 2017 Read time: 1 min
Italian firm 1141 SIMEX has produced a new TF 800/V rotary cutter for tunnel excavation applications.

Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.

Attached to a pair of 2300 Komatsu PC138 US short-radius excavators, and featuring a modified boom and special bracket, the rotary cutters were used to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements).

The cutters, deployed by Italian contractor Ceprini Costruzioni (CC), were equipped with drums measuring a width of 40cm and diameter of 110cm, and fitted with 144 Betek VC 33 bits with a 2.2cm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

www.simex.it

View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • MatTracker ensures densities at lane joints
    April 18, 2016
    TF-Technologies which specialises in technology related to asphalt paving has invented a new means of ensuring asphalt density along the longitudinal joints between lanes. The MatTracker, developed just in time for bauma 2016, ensures that the lap width is correct and controls the position of the paver.
    Read More
  • Genie’s telehandlers reach new heights at INTERMAT
    January 6, 2017
    Two extended reach telehandlers have been added to Genie’s range with the introduction of the 14metre reach GTH4014 and the GTH4018, which can lift loads to 18metres. The 4tonne capacity Stage IIIB-compliant machines have streamlined chassis to improve the operator’s view of the load and are said to offer best-in-class performance from a smaller footprint. In addition to the small footprint, the machines have tight turning circles (3.8m outside turning radius on the GTH-4018) a narrow overall width, and a
    Read More
  • Genie’s telehandlers reach new heights at INTERMAT
    April 19, 2012
    Two extended reach telehandlers have been added to Genie’s range with the introduction of the 14metre reach GTH4014 and the GTH4018, which can lift loads to 18metres. The 4tonne capacity Stage IIIB-compliant machines have streamlined chassis to improve the operator’s view of the load and are said to offer best-in-class performance from a smaller footprint. In addition to the small footprint, the machines have tight turning circles (3.8m outside turning radius on the GTH-4018) a narrow overall width, and a
    Read More
  • Tools for breaking
    February 9, 2012
    Mike Woof reports on equipment developments in the demolition sector. The hydraulic hammer is a tough tool used in a wide array of demolition jobs. Highly versatile, the breaker has evolved from a simple design based on rockdrilling equipment into a sophisticated and reliable piece of machinery. German firm Krupp and French company Montabert were pioneers of the hydraulic breaker, being followed into the market by a growing array of other manufacturers. Early breakers had the unfortunate habit of tearing th
    Read More

Highlighted Content