Simex’s TF 800/V rotary cutters

Italian firm Simex has produced a new TF 800/V rotary cutter for tunnel excavation applications. Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.
January 6, 2017 Read time: 1 min
Italian firm 1141 SIMEX has produced a new TF 800/V rotary cutter for tunnel excavation applications.

Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.

Attached to a pair of 2300 Komatsu PC138 US short-radius excavators, and featuring a modified boom and special bracket, the rotary cutters were used to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements).

The cutters, deployed by Italian contractor Ceprini Costruzioni (CC), were equipped with drums measuring a width of 40cm and diameter of 110cm, and fitted with 144 Betek VC 33 bits with a 2.2cm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

www.simex.it

View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Liebherr’s new LB 44-510 rotary drilling rig at Conexpo
    January 17, 2014
    Liebherr’s new 173tonne LB 44-510 rotary drilling rig offers 510kNm of torque, while the model’s in-house manufactured hydraulic drive provides automated torque adjustment, optimal continuous speed and four electronically adjustable speed ranges. The LB 44-510 has been designed for drilling diameters of up to 3m and up to 92m drilling depths. The drilling rig is driven by a 505kW Stage IIIB/ Tier 4i V8 diesel engine.
    Read More
  • Gubler gets down with a Kemroc EK 100 chain cutter
    May 1, 2018
    Boulders are usually removed from site by breaking them with a hammer and then using a backhoe to extract the rubble: a time-consuming process. Swiss construction company Gubler, however, used a Kemroc EK 100 chain cutter to cut down on processing time as well as wear and tear on company equipment. With an EK 100 chain cutter mounted on their 22tonne excavator, Gubler excavated the foundations, footings and service trenches in the typical local molasse rock. The project is a large residential complex and
    Read More
  • Toggenburger takes two Terex cranes to tackle a Swiss tandem lift
    August 21, 2015
    Two of the largest cranes in Switzerland recently were called upon to lift an 884tonne, 162m-long connecting bridge between two buildings at the Coop distribution centre in Schafisheim. “The individual bridge components had enormous gross weights of up to 275tonnes and required us to use working radii of up to 29m,” said Andre Huber, project manager at Toggenburger, the company that took on the task. To get the job done, Toggenburger rolled out its biggest machinery which also happen to be the two lar
    Read More
  • Utility machine innovations coming to market
    December 1, 2022
    A wide array of new items of compact utility equipment are coming to market, with low emissions and noise as key machine trends
    Read More

Highlighted Content