Simex’s TF 800/V rotary cutters

Italian firm Simex has produced a new TF 800/V rotary cutter for tunnel excavation applications. Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.
January 6, 2017 Read time: 1 min
Italian firm 1141 SIMEX has produced a new TF 800/V rotary cutter for tunnel excavation applications.

Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.

Attached to a pair of 2300 Komatsu PC138 US short-radius excavators, and featuring a modified boom and special bracket, the rotary cutters were used to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements).

The cutters, deployed by Italian contractor Ceprini Costruzioni (CC), were equipped with drums measuring a width of 40cm and diameter of 110cm, and fitted with 144 Betek VC 33 bits with a 2.2cm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

www.simex.it

View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Improved digging performance
    February 7, 2012
    Komatsu is rolling out its new PC190-8 excavator, which replaces the previous PC180-7 model. The new machine weighs in at up to 20tonnes and features an engine power increase of 7% over the previous model, boosting performance and productivity. Digging output is increased due to features such as a 200mm longer monoboom, and a maximum bucket capacity of 1.14m3. Lifting capacity is increased and the PC190-8 lifts over a tonne more than the PC180-7, while it offers a bucket digging force of 1.2tonnes, which
    Read More
  • Plan worth sticking too
    April 8, 2013
    Plan supplies turn-key plants for the manufacture of precast concrete elements for civil, industrial and commercial buildings. The company’s machinery and plants are designed and built with innovative and useful solutions to produce wall panels, columns, beams, roof elements, hollow-core slabs. Plan can also provide special bespoke products on request. The firm’s services also include installation and commissioning, factory design, electrical and mechanical design, operator training, and after-sales service
    Read More
  • Lintec showcases redesigned CSD 1500 plant at bauma
    January 6, 2017
    Especially redesigned to allow hot and cold recycling, Lintec will be showcasing its new CSD 1500 asphalt mixing plant at bauma. With a capacity of 120 tonnes/hour, the new CSD 1500 enables the integration of a hot storage silo with a 50tonne capacity. Similar to all Lintec’s CSD line plants, the aggregates enter the screen drum through the front wall.
    Read More
  • BOMAG offering highway class milling machine
    January 6, 2017
    BOMAG’s BM2000/60-2 milling machine is the firm’s top-of-the-range planer, aimed at high production applications. Designed for highway milling applications the machine features a 2m wide cutting drum and 168 teeth in standard configuration, although other tooth spacing can be used depending on the application and duty. The BM2000/6-2 can cut to depths from 0-320mm deep and offers cutting advance rates of 0-40m/min, depending on the application, while power comes from a diesel rated at 440kW. Weighing in at
    Read More

Highlighted Content