Simex’s TF 800/V rotary cutters

Italian firm Simex has produced a new TF 800/V rotary cutter for tunnel excavation applications. Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.
January 6, 2017 Read time: 1 min
Italian firm 1141 SIMEX has produced a new TF 800/V rotary cutter for tunnel excavation applications.

Two of the new rotary cutters were used to help construct the key Varzo Tunnel link in Italy, close to the border with Switzerland.

Attached to a pair of 2300 Komatsu PC138 US short-radius excavators, and featuring a modified boom and special bracket, the rotary cutters were used to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements).

The cutters, deployed by Italian contractor Ceprini Costruzioni (CC), were equipped with drums measuring a width of 40cm and diameter of 110cm, and fitted with 144 Betek VC 33 bits with a 2.2cm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

www.simex.it

View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Ausa’s telehandler proves popular at Conexpo
    January 6, 2017
    Ausa’s newest and smallest telehandler, the T 144 H plus, was receiving a lot of attention on the manufacturer’s stand at Conexpo. “We’ve had a lot of interest, especially in this machine,” said Mark Benfield, Ausa’s area manager for USA and Canada. “Some people like it more than skid steers because you get more reach and more lift for the same size of the machine.
    Read More
  • Ausa’s telehandler proves popular at Conexpo
    March 11, 2014
    Ausa’s newest and smallest telehandler, the T 144 H plus, was receiving a lot of attention on the manufacturer’s stand at Conexpo. “We’ve had a lot of interest, especially in this machine,” said Mark Benfield, Ausa’s area manager for USA and Canada. “Some people like it more than skid steers because you get more reach and more lift for the same size of the machine.
    Read More
  • Innovations are pushing boundaries in the concrete road paving sector
    February 18, 2013
    The concrete road paving market continues to develop - Mike Woof reports Concrete road paving technology continues to evolve, with new equipment and techniques coming to market. Although concrete road construction has been used for many years, problems with early generation technologies affected this market segment. The first concrete roads were constructed in sections, which led to problems at joints but these were addressed many years ago with the advent of slipform paving. Concrete roads constructed in t
    Read More
  • Atlas Copco’s launches new drill rig FlexiROC T45
    January 6, 2017
    Atlas Copco is launching its new top hammer surface drill rig, the FlexiROC T45, along with its new rock drill COP 3060. The company says the new rig, which follows the ROC F9 before it, was to be built on a tried and trusted platform that would provide high-availability and a wide area of use for both large and small applications. Field studies are said to show that the FlexiROC T45 with folding boom, depending upon rock conditions, uses only half as much fuel as its predecessor the ROC F9 using the same
    Read More

Highlighted Content