Sandvik adds to DC hammer drill line

Sandvik Construction has added the DC125R to its DC family of compact top hammer drill rigs. The remote-controlled self-propelled rig has a four-wheeled carrier that can also be equipped with rubber tracks for added mobility in difficult terrain. Capable of drilling 22-45mm diameter holes, the machine is capable of up to 300-400m3 in an eight-hour shift. The 3,150kg mini rig is powered by a 37kW engine that drives a 5.5kW rock drill. Designed primarily for foundation drilling, road cutting, trenching, line
January 6, 2017 Read time: 1 min
Remote-control rig pushes Sandvik line
2403 Sandvik Construction has added the DC125R to its DC family of compact top hammer drill rigs.

The remote-controlled self-propelled rig has a four-wheeled carrier that can also be equipped with rubber tracks for added mobility in difficult terrain. Capable of drilling 22-45mm diameter holes, the machine is capable of up to 300-400m3 in an eight-hour shift.

The 3,150kg mini rig is powered by a 37kW engine that drives a 5.5kW rock drill. Designed primarily for foundation drilling, road cutting, trenching, line drilling and bolting, the DC125R is said to offer improved manoeuvrability, allowing it to access confined sites. The refreshed design incorporates a new cooling system, with an externally mounted silencer to keep heat outside the engine compartment.

Stand: F6.616/1

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 49405 0 oLinkExternal www.Construction.Sandvik.com www.Construction.Sandvik.com false /EasySiteWeb/GatewayLink.aspx?alId=49405 false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • New integration with Carlson Machine Control and Atlas Copco’s FlexiROC with HEC3 Drills
    January 6, 2017
    Installation and testing has been completed at the Atlas Copco factory in Örebro, Sweden, on the first system integration of Carlson Machine Control’s CBx5 control box console running Carlson DrillGrade software on a FlexiROC HEC3 C65 drilling system. This is said to mark the first successful factory installation of a 3D drilling system integrating Atlas Copco’s new third party protocol available on FlexiROC drills with the HEC3 system. The first of several systems has been delivered to a mine in Finland an
    Read More
  • New integration with Carlson Machine Control and Atlas Copco’s FlexiROC with HEC3 Drills
    February 13, 2013
    Installation and testing has been completed at the Atlas Copco factory in Örebro, Sweden, on the first system integration of Carlson Machine Control’s CBx5 control box console running Carlson DrillGrade software on a FlexiROC HEC3 C65 drilling system. This is said to mark the first successful factory installation of a 3D drilling system integrating Atlas Copco’s new third party protocol available on FlexiROC drills with the HEC3 system. The first of several systems has been delivered to a mine in Finland an
    Read More
  • ZF chooses radial motor technology for its hydrostatic transmission
    January 6, 2017
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
    Read More
  • ZF chooses radial motor technology for its hydrostatic transmission
    April 18, 2013
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
    Read More

Highlighted Content