Rockmore International brings A-series hammers to bauma

Rockmore International introduced its new A-series down-the-hole (DTH) hammers at bauma. The ROK 600A and 650A have been added to the company’s ROK range of hammers. The new 6inch-class (152mm) DTH hammers are the first models in the new A-class series. The A hammers feature new component designs that are said to demonstrate better performance and penetration rates suited to smaller compressors. “We are committed to developing new DTH hammer solutions that increase productivity and reduce drilling operatin
January 6, 2017 Read time: 2 mins
Rockmore’s A-series hammer
5087 Rockmore International introduced its new A-series down-the-hole (DTH) hammers at 688 Bauma.

The ROK 600A and 650A have been added to the company’s ROK range of hammers. The new 6inch-class (152mm) DTH hammers are the first models in the new A-class series.

The A hammers feature new component designs that are said to demonstrate better performance and penetration rates suited to smaller compressors.  

“We are committed to developing new DTH hammer solutions that increase productivity and reduce drilling operating costs,” said Pejman Eghdami, executive vice president of Rockmore International.

“Our new A Series line incorporates technological advancements that allow the hammers to be compatible with a wider range of compressors. This has been achieved by lowering air consumption rates and instilling higher efficiency levels.”

The piston and wear sleeve components have been redesigned to increase airflow efficiency at lower air volumes for the hammer, resulting in air consumption dropping to 26.5m³/minute at 24.1bar, while increasing penetration rates and further improving productivity and performance.

The new A Series hammers are targeted for DTH bits to drill from 155mm to 178mm in mining, construction, quarry and water-well applications. Impact power is generated from a solid piston design that is made from advanced materials then case hardened.

Stand: C2.321

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12751 0 oLinkExternal www.Rockmore-Intl.com www.Rockmore-Intl.com false /EasySiteWeb/GatewayLink.aspx?alId=12751 false false%>

For more information on companies in this article

Related Content

  • Volvo launches D-series wheeled excavators at INTERMAT
    April 13, 2012
    Greater fuel efficiency, improved digging performance and revised styling are among the changes to be found on Volvo’s latest D-series wheeled excavators. The four-model EW range spans 14-21tonnes and benefits from a new engine, cab, hydraulics, substructure, boom, arm and controls. There is more power with D-series, from stage IIIB engines that use V-ACT technology. The four cylinder (EW140D) and six cylinder engines produce high torque at low engine speeds, said Volvo, giving rise to low fuel consumption.
    Read More
  • Rammer hammers deliver more powerful blow
    January 6, 2017
    Rammer, the hydraulic breaker division of Sandvik Construction, has added four additional hammers to its line-up. There are three new models for the compact range – the 255, 355 and 455 – plus the 5011 model joins the heavy breaker line. The small range models are suitable for 1.2-5.2tonne carriers. They all feature Rammer’s constant blow energy (CBE) operating design that ensures constant impact energy for every blow. The 5011 is designed for use with carrier machines in the 43-80tonne class, slotting into
    Read More
  • Rammer hammers deliver more powerful blow
    April 15, 2013
    Rammer, the hydraulic breaker division of Sandvik Construction, has added four additional hammers to its line-up. There are three new models for the compact range – the 255, 355 and 455 – plus the 5011 model joins the heavy breaker line. The small range models are suitable for 1.2-5.2tonne carriers. They all feature Rammer’s constant blow energy (CBE) operating design that ensures constant impact energy for every blow. The 5011 is designed for use with carrier machines in the 43-80tonne class, slotting into
    Read More
  • CTE holds dealer training at bauma
    April 19, 2013
    CTE held a successful dealer training session at bauma, aimed particularly at sharing product information including its new Zed truck-mounted articulated platforms’ variable jacking system. Other key areas of focus included the new Traccess models – which are almost ready to be presented to the market. CTE dealers were present from Russia, Slovakia, the Czech Republic, Serbia, France, England, Germany, Switzerland, Holland, Denmark, Belgium, Australia, China and the Middle East.
    Read More

Highlighted Content