Skip to main content

RDS unveils on-board weighing instruments for wheeled loaders

RDS is to debut its Loadmaster iX range of on-board weighing instruments for wheeled loaders at INTERMAT 2012
March 8, 2012 Read time: 1 min
The RDS Loadmaster 8000iX, one of a new range of on-board weighing instruments
RSS2587 RDS Technology is to debut its Loadmaster iX range of on-board weighing instruments for wheeled loaders at INTERMAT 2012.

Loadmaster iX is said to benefit from additional standard features including temperature compensation enhancing system performance particularly on machines with a wide variation in operating temperature and angle compensation providing an additional level of precision beneficial on most sites and not only those with obvious slopes.

“In addition, the Loadmaster iX range offers effective management of weighing data. The Loadmaster 8000iX has an integral SD card port for the fast and efficient transfer of data between loader and weighbridge or office PC and enables pre-registered customer reference data to be uploaded directly to the instrument,” says the company.

The company has recently gained approval via the UK National Measurements Office to self-verify its instruments, and subject to formal training by RDS Technology, this approval extends to all EU RDS distributors.

www.rdstec.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Kögel is offering tough and lightweight tipping trailers
    March 14, 2013
    Heavy equipment trailer specialist Kögel has developed two novel tipper trailers, featuring two and three axles.The two axle tipper trailer offers a load volume of 24m³ or 27m³ with a 4mm-thick Hardox 450 base and side walls made from aluminium. The advantage of the steel base with lightweight walls means that it can be used continuously for more than 10 years, while an aluminium trough would need repairs every two to three years.
  • Kögel is offering tough and lightweight tipping trailers
    January 6, 2017
    Heavy equipment trailer specialist Kögel has developed two novel tipper trailers, featuring two and three axles.The two axle tipper trailer offers a load volume of 24m³ or 27m³ with a 4mm-thick Hardox 450 base and side walls made from aluminium. The advantage of the steel base with lightweight walls means that it can be used continuously for more than 10 years, while an aluminium trough would need repairs every two to three years.
  • Montabert extends low-cost breaker offering
    January 6, 2017
    Breaker specialist Montabert has increased its budget offering with a new two-speed unit and additions to its Blue Line. By restricting the speed choice to two, the new V3500 breaker (suitable for carriers from 35 to 60tonnes) is around 20% cheaper than its full-spec multi-speed counterpart while still allowing the machine operator the choice between maximum speed and maximum impact power. The company’s Blue Line, described as a simple breaker design, has been extended at the light end of the range by the a
  • Montabert extends low-cost breaker offering
    April 19, 2012
    Breaker specialist Montabert has increased its budget offering with a new two-speed unit and additions to its Blue Line. By restricting the speed choice to two, the new V3500 breaker (suitable for carriers from 35 to 60tonnes) is around 20% cheaper than its full-spec multi-speed counterpart while still allowing the machine operator the choice between maximum speed and maximum impact power. The company’s Blue Line, described as a simple breaker design, has been extended at the light end of the range by the a