Skip to main content

Ramtec adds new high-impact range of BH backhoe hydraulic hammers

Attachments specialist Ramtec is adding three new hydraulic hammers to its range at Bauma. The BH32, BH40 and BH52 backhoe hammers will be marketed under the Robi brand and the key features are high oil flows for high impact frequency, greater productivity levels and more penetration effort; constant blow energy to ensure constant strength; and low fuel consumption rates. All of the new backhoe hammers have sound suppression housing as standard, says Ramtec. The Finnish manufacturer will also unveil a new c
February 15, 2013 Read time: 1 min
Attachments specialist 2172 Ramtec is adding three new hydraulic hammers to its range at 688 Bauma. The BH32, BH40 and BH52 backhoe hammers will be marketed under the Robi brand and the key features are high oil flows for high impact frequency, greater productivity levels and more penetration effort; constant blow energy to ensure constant strength; and low fuel consumption rates. All of the new backhoe hammers have sound suppression housing as standard, says Ramtec. The Finnish manufacturer will also unveil a new crusher grapple, the CG20R, at the show. The grapple will crush wood, bricks and concrete down to 350mm, says Ramtec, and it will also separate out rebar.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Ramtec.fi www.Ramtec.fi false http://www.ramtec.fi/ false false%>

For more information on companies in this article

Related Content

  • ZF chooses radial motor technology for its hydrostatic transmission
    January 6, 2017
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
  • ZF chooses radial motor technology for its hydrostatic transmission
    April 18, 2013
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als