Skip to main content

PPRS: action needed now on US bridges

More than 9% of major highway bridges in the US are “rated structurally deficient” and in need of “urgent attention”, according to Bud Wright, chief executive of AASHTO, the American Association of State Highway and Transportation Officials. Action is needed now. In a recent infrastructure report, AASHTO reported that the US has just over 614,000 road bridges, 25% of which are 50 or more years older. Also, around 56,000 - 9.1% - of them are now structurally deficient. This is a shocking and growing
March 27, 2018 Read time: 2 mins

More than 9% of major highway bridges in the US are “rated structurally deficient” and in need of “urgent attention”, according to Bud Wright, chief executive of AASHTO, the American Association of State Highway and Transportation Officials. Action is needed now.

In a recent infrastructure report, AASHTO reported that the US has just over 614,000 road bridges, 25% of which are 50 or more years older. Also, around 56,000 - 9.1% -  of them are now structurally deficient.

This is a shocking and growing problem, Wright told PPRS 2018, the Pavement Preservation and Recycling Summit 2018 in Nice, France. On average, there are 188 million trips across a structurally deficient bridge each day in the US.

According to AASHTO, “the average age of America’s bridges keeps going up. Many are approaching the end of their design life.”
 
The association says that its “most recent estimate puts the nation’s backlog of bridge rehabilitation needs at $123 billion”. And, if this was not bad enough, Wright also told this week’s congress that “more than 70% of the roads in the US are in a poor and dangerous condition and we have a growing maintenance backlog”.
 
Wright believes that new technologies are going to be the key to a brighter future. The highways sector needs to experiment with things like chip seals, new micro-surfacing techniques, new diamond-grinding approaches to concrete road surfaces and so on.

Just as importantly, the work needs to be done now; the clock is ticking. “We really must do this sort of maintenance work while the road surface is still sound… while the pavement is still in good order,” said Wright.

He also told the event’s 900-plus delegates that the industry needs to work much harder at communicating with the general public. People take the transport system for granted “but there is no consensus on how to pay” for what needs to be done on the roads. We need to “make our systems as transparent as possible”.

Related Content

  • Germany to cut red tape for bridge construction up to 2027
    October 5, 2017
    The German federal government has set aside €4.5 billion for refurbishment of 400 bridges in the state of North Rhine-Westphalia up to 2027. Hendrik Wüst, North Rhine-Westphalia transport minister, made the announcement which included around €200 million for road maintenance. The Federal German government also plans to fast-track planning for infrastructure projects. Bonuses to contractors for improved performance to reduce down-time on construction sites as well as the possibily of a six-day working
  • Germany’s B-85 gets the treatment from Bomag’s BM 2200/75 planer
    February 23, 2018
    By this spring, Bomag’s new BM 2200/75 cold planer will have removed all the old pavement from a 2.6km section of Germany’s federal highway B-85. Work on the section between Amberg and Pittersberg started at the end of 2016 after the Ministry of Transport classified the road as being in “urgent need” of upgrading as part of the Federal Transport Infrastructure Plan. Actual roadworks began in mid-June 2017 after essential forestry work had been carried out, such as the removal of tree roots on both sides
  • WiM eases bridge health worries
    July 31, 2024
    Ageing road bridges are leading road authorities to consider the case for using weigh-in-motion - WiM - solutions to monitor the health of such infrastructure, writes Adam Hill.
  • Skanska and Kraton boost RAP use with called SYLVAROAD™ RP1000
    November 23, 2017
    The city of Västerås in central Sweden is known as a centre for industrial automation and information technology. Innovation abounds here and with it comes strong environmental efforts – meeting carbon reduction goals and maximising the recycling process, for example. A road construction project just outside this picturesque city highlights such innovation.