Skip to main content

PPRS: action needed now on US bridges

More than 9% of major highway bridges in the US are “rated structurally deficient” and in need of “urgent attention”, according to Bud Wright, chief executive of AASHTO, the American Association of State Highway and Transportation Officials. Action is needed now. In a recent infrastructure report, AASHTO reported that the US has just over 614,000 road bridges, 25% of which are 50 or more years older. Also, around 56,000 - 9.1% - of them are now structurally deficient. This is a shocking and growing
March 27, 2018 Read time: 2 mins

More than 9% of major highway bridges in the US are “rated structurally deficient” and in need of “urgent attention”, according to Bud Wright, chief executive of AASHTO, the American Association of State Highway and Transportation Officials. Action is needed now.

In a recent infrastructure report, AASHTO reported that the US has just over 614,000 road bridges, 25% of which are 50 or more years older. Also, around 56,000 - 9.1% -  of them are now structurally deficient.

This is a shocking and growing problem, Wright told PPRS 2018, the Pavement Preservation and Recycling Summit 2018 in Nice, France. On average, there are 188 million trips across a structurally deficient bridge each day in the US.

According to AASHTO, “the average age of America’s bridges keeps going up. Many are approaching the end of their design life.”
 
The association says that its “most recent estimate puts the nation’s backlog of bridge rehabilitation needs at $123 billion”. And, if this was not bad enough, Wright also told this week’s congress that “more than 70% of the roads in the US are in a poor and dangerous condition and we have a growing maintenance backlog”.
 
Wright believes that new technologies are going to be the key to a brighter future. The highways sector needs to experiment with things like chip seals, new micro-surfacing techniques, new diamond-grinding approaches to concrete road surfaces and so on.

Just as importantly, the work needs to be done now; the clock is ticking. “We really must do this sort of maintenance work while the road surface is still sound… while the pavement is still in good order,” said Wright.

He also told the event’s 900-plus delegates that the industry needs to work much harder at communicating with the general public. People take the transport system for granted “but there is no consensus on how to pay” for what needs to be done on the roads. We need to “make our systems as transparent as possible”.

Related Content

  • Trimble’s latest advance in machine controls
    April 12, 2018
    Trimble is building on proven technology with its latest advances for the machine control segment - Mike Woof writes With new systems coming to market, Trimble is keen to retain its strong position in the machine control segment. The firm is now introducing advanced technology for the bulldozer segment, which utilises similar systems to the Earthworks package unveiled for excavators at the CONEXPO show in early 2017. Eric Crim is product manager for machine control systems in Trimble's heavy & highway
  • Connected vehicles: implications for road networks and mobility
    May 15, 2019
    Mobility services are expected to undergo spectacular changes within the next two decades with the introduction and widespread use of connected and autonomous vehicle (CAV) technology. However, the transition phase from human driving to self-driving will be gradual, requiring incremental interventions on the physical and digital road network to allow it to cope with mixed vehicular traffic. Cities such as Dubai have embraced the challenge by setting a target to reach 25% driverless trips by 2030 as part o
  • All change – the evolution of data
    October 13, 2017
    Bentley Systems believes that it is on the cusp of a revolutionary step in computing that will boost the working efficiency of companies right across industry. Bhupinder Singh, chief products officer at Bentley Systems explained that its key advance will allow firms to utilise what they already have, but more efficiently.
  • Concrete runway paving in the US
    December 15, 2017
    A new Wirtgen SP 94i slipform paver has helped deliver the successful reconstruction of a runway in the US state of Missouri. With more than 30,000 take-offs and landings a year, Jefferson City Memorial Airport (JEF) is one of the most heavily frequented airports in Missouri. Thousands of visitors travel through it every day on their way to the government and congress offices in the state capital on the Missouri River. At the end of April 2016, work commenced on the reconstruction of a runway approximately