Skip to main content

November/December 2010

A Caterpillar 730 ADT recently took to the air at a project in Switzerland and the 23tonne truck was carried to a site with restricted access in the alps, using a specially adapted lifting assembly attached to the cable normally used for a cable car. However whether this big Cat lost one of its nine lives in the process remains to be seen!
March 13, 2012 Read time: 1 min
A Caterpillar 730 ADT recently took to the air at a project in Switzerland and the 23tonne truck was carried to a site with restricted access in the alps, using a specially adapted lifting assembly attached to the cable normally used for a cable car. However whether this big Cat lost one of its nine lives in the process remains to be seen!

Related Content

  • New machines competing in ADT market
    February 19, 2013
    All-wheel-drive trucks for the Chinese market - Mike Woof reports. One noticeable development at the bauma China exhibition in Shanghai in late 2012 was the proliferation of ADT models. Doosan and Volvo showed some of their latest ADT variants alongside their latest excavators and are keen to highlight the benefits of ADTs for use on sites where traction or grade may be an issue for rigid trucks or on/off highway haulers. However Caterpillar chose to highlight its off-highway rigid trucks at bauma China, as
  • Major emissions challenges for ADTs
    February 14, 2012
    The introduction of the latest emissions standards in North America and Europe are requiring major design rethinks for earthmoving machines such as ADTs, Mike Woof reports. With the introduction of the Tier 4 Interim/Stage IIIB emissions legislation, major changes are being made to off-highway machines. One of the machine types most affected by this legislation will be the articulated dump truck (ADT) and designers have faced major challenges in developing solutions that retain what are now seen as key oper
  • Higher production from all-wheel-drive haulers
    August 2, 2012
    The improvements to articulated dump trucks (ADTs) have been substantial in recent years. Comparing a present day machine with one from 20 or even just 10 years ago shows how far design has come. Major improvements have been made in visibility, operator comfort levels, rough terrain performance, driveline efficiency and productivity, to name but a few key areas. All of the latest generation ADTs available on the world market now come with Tier 3/Stage IIIA compliant diesels that produce far lower noise and
  • Skid steer loader - more versatile than a jack of all trades
    February 17, 2012
    The skid steer loader has for many years been known as a jack-of-all-trades. Indeed the term loader can be a bit misleading, as a skid steer is far more than simply a digging or lifting machine. Skid steers, and their more recent compact tracked loader stablemates, are the original powered tool carriers. They are designed to work with a host of attachments, not just a bucket or pallet forks. However while this concept of one base machine and a multitude of attachments has been a big success in North America