Skip to main content

November/December 2010

A Caterpillar 730 ADT recently took to the air at a project in Switzerland and the 23tonne truck was carried to a site with restricted access in the Alps, using a specially adapted lifting assembly attached to the cable normally used for a cable car. However whether this big Cat lost one of its nine lives in the process remains to be seen.
March 13, 2012 Read time: 1 min
A 178 Caterpillar 730 ADT recently took to the air at a project in Switzerland and the 23tonne truck was carried to a site with restricted access in the Alps, using a specially adapted lifting assembly attached to the cable normally used for a cable car. However whether this big Cat lost one of its nine lives in the process remains to be seen.

For more information on companies in this article

Related Content

  • Toggenburger takes two Terex cranes to tackle a Swiss tandem lift
    August 21, 2015
    Two of the largest cranes in Switzerland recently were called upon to lift an 884tonne, 162m-long connecting bridge between two buildings at the Coop distribution centre in Schafisheim. “The individual bridge components had enormous gross weights of up to 275tonnes and required us to use working radii of up to 29m,” said Andre Huber, project manager at Toggenburger, the company that took on the task. To get the job done, Toggenburger rolled out its biggest machinery which also happen to be the two lar
  • Major emissions challenges for ADTs
    February 14, 2012
    The introduction of the latest emissions standards in North America and Europe are requiring major design rethinks for earthmoving machines such as ADTs, Mike Woof reports. With the introduction of the Tier 4 Interim/Stage IIIB emissions legislation, major changes are being made to off-highway machines. One of the machine types most affected by this legislation will be the articulated dump truck (ADT) and designers have faced major challenges in developing solutions that retain what are now seen as key oper
  • The Mersey Gateway bridge project continues on schedule
    October 18, 2016
    Work continues on the 2.3km Mersey Gateway signature bridge project close to Liverpool in the UK. David Arminas reports on some of the construction highlights. Under construction is a cable-stayed structure with three towers that will span the Mersey River’s expansive mud flats between the towns of Runcorn and Widnes near Liverpool. Including the approach viaducts on each side, it will be 2.3km long with a river span of 1km. The main bridge deck will be reinforced concrete. The 80m-high central tower will b
  • Tracking for efficiency
    July 20, 2012
    French paving contractor Révillon is now using a new Cat AP300 wheeled asphalt paver, which replaces one of its two older Bitelli BB730 units. The firm took delivery of a field follow unit of the AP300, the model Caterpillar has developed to replace the BB730. Supplied by French Cat dealer Bergerat-Monnoyeur, the AP300 has met Révillon's expectations in terms of performance and is said to offer benefits over the earlier BB730. The new machine is aimed at the 6-8tonne, 1.7m paving width but is said to offer