Skip to main content

Noise needed for quiet cars

Electric vehicles and hybrids should be fitted with noise emission equipment to reduce danger levels for the blind and partially sighted, according to the European Blind Union (EBU). The EBU is calling on the EU to make noise generators compulsory for all electric and hybrid vehicles due to the obvious risks these pose to blind and partially sighted people. Hybrid vehicles generally run in electric mode when operating at lower speeds in the urban cycle and generate very little engine noise, while electric v
January 9, 2014 Read time: 2 mins
Electric vehicles and hybrids should be fitted with noise emission equipment to reduce danger levels for the blind and partially sighted, according to the European Blind Union (EBU). The EBU is calling on the 3287 EU to make noise generators compulsory for all electric and hybrid vehicles due to the obvious risks these pose to blind and partially sighted people. Hybrid vehicles generally run in electric mode when operating at lower speeds in the urban cycle and generate very little engine noise, while electric vehicles are almost always quiet in use. For blind and partially sighted people relying on hearing the sound of approaching vehicles, this poses a major traffic hazard. A study carried out in Japan did reveal worryingly high levels of traffic incidents involving blind and partially sighted people and low noise hybrid vehicles operating in urban areas.

There is legislation being set out in the EU but according to the EBU, progress is too slow while the fact that these systems can be turned off by the driver may make them useless in any case. In the mean-time, some 30 million blind and partially sighted people in Europe are at risk. And electric and hybrid vehicles also pose a hazard to other vulnerable road users too, with children and cyclists particularly at risk.

For more information on companies in this article

Related Content

  • CEA conference 2018 – focusing on technology solutions
    May 2, 2018
    New technology and reduced machine emissions were amongst the key topics at the CEA conference in London - Mike Woof writes. Construction machine manufacturers are going to have to find new solutions if targets on emissions controls are going to be met. This is a clear viewpoint for the industry. But as the speakers at the recent CEA conference in London showed, there are differing opinions on how that will be achieved and what technical solutions will come to the fore. Duncan Riding, business development
  • Safer speeds required says new report
    June 18, 2018
    A new report highlights speeding as a significant factor in a worryingly high percentage of road crashes. According to the report, inappropriate speed is responsible for between 20% and 30% of all road crashes involving fatalities. The report is based on a review of research into the relationship between speed and crash risk and has been produced by the OECD’s International Transport Forum (ITF).
  • Powered two wheeler safety plan for Europe
    November 16, 2015
    A new road safety strategy for powered two wheelers in Europe has been set out jointly following discussions. The results of analysis have been set out in a joint position statement by the bodies FEMA, FIM and FIM Europe. In the draft report FEMA and FIM have identified seven major areas of great importance that are in accordance with the positions of the riders’ organisations in Europe and elsewhere. Key recommendations and statements from the OECD-ITF draft report highlight issues for the safety of powe
  • Europe’s road safety picture slanted wrong way?
    May 24, 2016
    The European Commission’s latest figures for road safety reveal some cause for concern across the EU. While the EU has the world’s safest roads overall, the road fatality rate has slipped during 2015. And this is for the second consecutive year also as EU road deaths in 2014 also showed an increase over 2013. By comparison, there were decreases in the European road death rate of 8% in 2012 and 2013.