Dressta is offering improved versions of its 560E and 555C Extra wheeled loaders, with new Cummins diesels. Power for the larger 560E Extra now comes from a Cummins QSX15 diesel rated at 319kW, compared with the 310kW of the previous engine in this machine. The six cylinder Cummins engine drives through a torque converter, a three-speed, full powershift, countershaft transmission, front and rear axle drives and conventional differentials.
February 8, 2013
Read time: 2 mins
3420 Dressta is offering improved versions of its 560E and 555C Extra wheeled loaders, with new 196 Cummins diesels. Power for the larger 560E Extra now comes from a Cummins QSX15 diesel rated at 319kW, compared with the 310kW of the previous engine in this machine. The six cylinder Cummins engine drives through a torque converter, a three-speed, full powershift, countershaft transmission, front and rear axle drives and conventional differentials. Other new features include joystick boom and bucket controls, hydrostatic steering and a high visibility cab and this 42tonne wheeled loader has a payload capacity of 5.35m3 with a high lift boom. Meanwhile the 29tonne 555C Extra now has a Cummins QSM-11 diesel that delivers 238KW and a maximum of torque of 1674 Nm. Bucket capacities for this machine range from 4.2-8.4m3 depending on the application. The company has also added a new cooling module and upgraded the hydraulic system to allow for a variable speed fan for greater cooling.
LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
Case’s 12.2tonne 621F wheeled loader will make its first appearance at a European show during bauma. Powered by a second generation common-rail Tier 4 interim engine and benefiting from the use of fuel saving SCR technology, the 621F is said to have proven ZF auto powershift transmission and heavy duty axles. The model is also equipped with a 100% locking front differential for maximum traction and reduced tyre wear. Similar to other larger Case F Series wheeled loaders, the 621F has a cooling pack directly
Case’s 12.2tonne 621F wheeled loader will make its first appearance at a European show during bauma. Powered by a second generation common-rail Tier 4 interim engine and benefiting from the use of fuel saving SCR technology, the 621F is said to have proven ZF auto powershift transmission and heavy duty axles. The model is also equipped with a 100% locking front differential for maximum traction and reduced tyre wear. Similar to other larger Case F Series wheeled loaders, the 621F has a cooling pack directly
Torgnum Group used bauma 2013 to reveal its new MTU 1600 Series engine platform, developed specifically for off-highway use, that meets EPA Tier 4 Final emissions requirements. In 17.5litre capacity V10 format and 21litre V12, the two new diesel engines span a power range from 567kW-730kW, and provide peak torque figures of 3,500Nm and 4,200Nm respectively. “These two new engine formats slot into our range between the 1500 Series and the 2000 Series engine ranges,” said Mirko Gutemann, Tognum Group marketin
