New small bridge inspection from Moog

The new crawler version of Moog’s MBI 50 unit has been designed especially for operation on narrow pedestrian bridges. With the load distribution on two crawlers it is possible to stick to a minimum area load even though the overall width is 1.6m and the weight 3,000kg. This makes it possible to work on bridges that are rated low-weight only.
April 17, 2013 Read time: 1 min
Moog’s MB1 50 designed for operation on small bridges
The new crawler version of 724 MOOG’s MBI 50 unit has been designed especially for operation on narrow pedestrian bridges.

With the load distribution on two crawlers it is possible to stick to a minimum area load even though the overall width is 1.6m and the weight 3,000kg. This makes it possible to work on bridges that are rated low-weight only.

The assembly is fast and uncomplicated requiring one person and a few minutes of time to complete.

The system has two versions of assembly – standard and an option where the platform can be rotated 90 degrees downward before the tower is buckled in sideways. Using this version the unit can be deployed on very small bridges or between aerial lines. The 5m platform has a load capacity of 300kg, making the unit suitable for inspection work as well as smaller repair work.

www.moog-online.de

View more stories

For more information on companies in this article

Related Content

  • INTERMAT launch for Ammann’s ACE Pro single drum rollers
    January 6, 2017
    Ammann’s ASC 110 and 150 ACE Pro single drum rollers will also be launched at INTERMAT. Powered by Cummins QSB 4.5 engines and with operating weights of 11,260kg and 15,210kg, the two new models offer intelligent compaction using continuous compaction control (CCC). Frequency ranges are 27–35Hz and 27–36 Hz respectively, while static line loads are 34.5kg/cm for the 110 model and 51.2kg/cm for the heavier 150.
    Read More
  • GOMACO makes its successful Commander III slipform paver even more versatile
    January 6, 2017
    GOMACO says that a series of improvements to its Commander III slipform paver will help increase the machine’s versatility and overall performance. The paver will be on the market in the third quarter of this year and the three-track machine’s key improvements include a new G+ control system and a new low emission, Tier 4 compliant engine.
    Read More
  • GOMACO makes its successful Commander III slipform paver even more versatile
    March 4, 2014
    GOMACO says that a series of improvements to its Commander III slipform paver will help increase the machine’s versatility and overall performance. The paver will be on the market in the third quarter of this year and the three-track machine’s key improvements include a new G+ control system and a new low emission, Tier 4 compliant engine.
    Read More
  • Yanmar shows tracked swivel skip at INTERMAT
    January 6, 2017
    Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body. The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine. In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction
    Read More

Highlighted Content