Montabert extends low-cost breaker offering

Breaker specialist Montabert has increased its budget offering with a new two-speed unit and additions to its Blue Line. By restricting the speed choice to two, the new V3500 breaker (suitable for carriers from 35 to 60tonnes) is around 20% cheaper than its full-spec multi-speed counterpart while still allowing the machine operator the choice between maximum speed and maximum impact power. The company’s Blue Line, described as a simple breaker design, has been extended at the light end of the range by the a
January 6, 2017 Read time: 2 mins
Marketing Director Alain Carbonnel shows off the Blue Line breakers from Montabert
RSSBreaker specialist 2396 Montabert has increased its budget offering with a new two-speed unit and additions to its Blue Line.

By restricting the speed choice to two, the new V3500 breaker (suitable for carriers from 35 to 60tonnes) is around 20% cheaper than its full-spec multi-speed counterpart while still allowing the machine operator the choice between maximum speed and maximum impact power.

The company’s Blue Line, described as a simple breaker design, has been extended at the light end of the range by the addition of the XL1000 and XL1300, which suit 11 to 17tonne and 15 to 22 tonne carriers respectively.

They use 107mm and 124mm tools to deliver 2000 and 2700Joules of blow energy and Montabert said the new units retain its build quality but are around half the cost of the full spec breaker.

www.montabert.fr

Hall: 6 Stand: G090

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Mecalac MCR6 combines excavator and loader in one machine
    January 6, 2017
    Mecalac Group has introduced the MCR6 compact excavator, first previewed at last year’s Intermat exhibition. A combination of both compact excavator and loader in a single machine, the MCR6 joins the larger MCR8 and MCVR10 in the Mecalac line. Capable of travelling at speeds up to 10km/h, the MCR machines can switch from excavator to loader mode in seconds, providing customers with a highly versatile machine. The MCR6 weighs in at 6tonnes and is powered by a 55kW engine. Maximum tearout force in excavator c
    Read More
  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Model&Co revealed new grouter at INTERMAT
    January 6, 2017
    Model&Co, a Spanish manufacturer of foundation engineering equipment, used INTERMAT to launch a fully automatic concrete grout mixer. ith advanced electronics, the new mixer uses a touch-screen control panel for the input of concrete powder ratio and water volumes. It can deliver up to 170litres/min of hydrogenised grout at working pressures of up to 115bar. The mixer drum can also be rotated 95° from its vertical position, to simplify washing out.
    Read More

Highlighted Content