Skip to main content

Minimum noise requirement legislation is planned for electric and hybrid vehicles in the US

A new move by the US Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) could see hybrid and electric vehicles being required to meet minimum sound emissions standards. This would be so as to help make pedestrians more aware of the approaching vehicles and follows on from a Japanese study into the prevalence of accidents involving hybrid vehicles with pedestrians in urban areas. “Safety is our highest priority, and this proposal will help keep everyone using our nation’s
January 10, 2013 Read time: 3 mins
Electric vehicles such as this RUF model may require noise generators to improve safety for pedestrians when being driven at low speeds under planned US regulations
A new move by the 2364 US Department of Transportation’s 2467 National Highway Traffic Safety Administration (NHTSA) could see hybrid and electric vehicles being required to meet minimum sound emissions standards. This would be so as to help make pedestrians more aware of the approaching vehicles and follows on from a Japanese study into the prevalence of accidents involving hybrid vehicles with pedestrians in urban areas.  

“Safety is our highest priority, and this proposal will help keep everyone using our nation’s streets and roadways safe, whether they are motorists, bicyclists or pedestrians, and especially the blind and visually impaired,” said US Transportation Secretary Ray LaHood.

As electric and hybrid vehicles are quieter at low speeds, their approach is difficult to detect aurally. This is a particular issue for the blind, although many pedestrians also rely heavily on sound rather than using visual means to scan for approaching vehicles, before stepping into the roadway. The issue has come as something of a surprise to many extolling the virtues of electric and hybrid vehicles and who have either ignored or failed to understand the risks posed by the far lower sound emission levels.

But the proposed standard, Federal Motor Vehicle Safety Standard N. 141, would fulfill a mandate in the Pedestrian Safety Enhancement Act that hybrid and electric vehicles meet minimum sound requirements. This would ensure pedestrians are able to detect the presence, direction and location of these vehicles when they are operating at low speeds. “Our proposal would allow manufacturers the flexibility to design different sounds for different makes and models while still providing an opportunity for pedestrians,  bicyclists and the visually impaired to detect and recognize a vehicle and make a decision about whether it is safe to cross the street,” said NHTSA Administrator David Strickland.

The sounds would need to be detectable under a wide range of street noises and other ambient background sounds when the vehicle is traveling under 29km/h.  At speeds of 29km/h and above, vehicles make sufficient noise to allow pedestrians and bicyclists to detect them without added sound.  Each vehicle manufacturer would have a significant range of choices about the sounds it chooses for its vehicles, but the characteristics of those sounds would need to meet certain minimum requirements.  In addition, each vehicle of the same make and model would need to emit the same sound or set of sounds.

NHTSA estimates that if this proposal were implemented there would be 2,800 fewer pedestrian and pedalcyclist injuries over the life of each model year of hybrid cars, trucks and vans and low speed vehicles, as compared to vehicles without sound.

For more information on companies in this article

Related Content

  • Quiet cars causing concerns for pedestrians
    March 30, 2015
    Data from the UK reveals that quiet electric vehicles or hybrids operating in electric mode pose particular problems for pedestrians. A report has found that such vehicles are 40% more likely to be involved in a traffic incident involving a pedestrian than a conventional combustion-engined vehicle. The report adds that partially sighted or blind people face the highest risks, while children and older people are also at risk. This follows earlier research from Japan, highlighting the risks to pedestrians pos
  • Improving safety for cyclists
    November 15, 2013
    New systems in development for protecting vulnerable road users - Mike Woof writes In many European countries the number of people using bicycles for commuting are increasing. This is being actively encouraged by city authorities as it offers an effective way to reduce traffic congestion, lower exhaust emissions and also improve public health. The Netherlands and Denmark have long had high percentages of commuters opting to use bicycles and other European countries are looking to capitalise on the experienc
  • The use of concrete cutting tools and tips for users
    October 8, 2015
    Despite the proven importance of identifying metal targets and electrical lines before cutting into concrete, every day there are stories about mishaps that happen when the necessary reconnaissance is not done. In this article, a few firms that provide concrete scanning services weigh in on the critical importance of locating embedded and or buried obstructions by scanning for these features using ground penetrating radar (GPR). Also offered are tips for selecting the best GPR equipment and best practices f
  • Developments in workzone safety systems
    May 3, 2012
    Raising awareness of safety in highway work zones is a global issue, and various initiatives highlight this as Patrick Smith reports. So seriously is work zone safety taken in the United States that each year since 1999 a special week has been set aside to highlight it. Each year in April, National Work Zone Awareness Week is held to bring national attention to motorist and worker safety and mobility issues in work zones.