Skip to main content

Minimum noise requirement legislation is planned for electric and hybrid vehicles in the US

A new move by the US Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) could see hybrid and electric vehicles being required to meet minimum sound emissions standards. This would be so as to help make pedestrians more aware of the approaching vehicles and follows on from a Japanese study into the prevalence of accidents involving hybrid vehicles with pedestrians in urban areas. “Safety is our highest priority, and this proposal will help keep everyone using our nation’s
January 10, 2013 Read time: 3 mins
Electric vehicles such as this RUF model may require noise generators to improve safety for pedestrians when being driven at low speeds under planned US regulations
A new move by the 2364 US Department of Transportation’s 2467 National Highway Traffic Safety Administration (NHTSA) could see hybrid and electric vehicles being required to meet minimum sound emissions standards. This would be so as to help make pedestrians more aware of the approaching vehicles and follows on from a Japanese study into the prevalence of accidents involving hybrid vehicles with pedestrians in urban areas.  

“Safety is our highest priority, and this proposal will help keep everyone using our nation’s streets and roadways safe, whether they are motorists, bicyclists or pedestrians, and especially the blind and visually impaired,” said US Transportation Secretary Ray LaHood.

As electric and hybrid vehicles are quieter at low speeds, their approach is difficult to detect aurally. This is a particular issue for the blind, although many pedestrians also rely heavily on sound rather than using visual means to scan for approaching vehicles, before stepping into the roadway. The issue has come as something of a surprise to many extolling the virtues of electric and hybrid vehicles and who have either ignored or failed to understand the risks posed by the far lower sound emission levels.

But the proposed standard, Federal Motor Vehicle Safety Standard N. 141, would fulfill a mandate in the Pedestrian Safety Enhancement Act that hybrid and electric vehicles meet minimum sound requirements. This would ensure pedestrians are able to detect the presence, direction and location of these vehicles when they are operating at low speeds. “Our proposal would allow manufacturers the flexibility to design different sounds for different makes and models while still providing an opportunity for pedestrians,  bicyclists and the visually impaired to detect and recognize a vehicle and make a decision about whether it is safe to cross the street,” said NHTSA Administrator David Strickland.

The sounds would need to be detectable under a wide range of street noises and other ambient background sounds when the vehicle is traveling under 29km/h.  At speeds of 29km/h and above, vehicles make sufficient noise to allow pedestrians and bicyclists to detect them without added sound.  Each vehicle manufacturer would have a significant range of choices about the sounds it chooses for its vehicles, but the characteristics of those sounds would need to meet certain minimum requirements.  In addition, each vehicle of the same make and model would need to emit the same sound or set of sounds.

NHTSA estimates that if this proposal were implemented there would be 2,800 fewer pedestrian and pedalcyclist injuries over the life of each model year of hybrid cars, trucks and vans and low speed vehicles, as compared to vehicles without sound.

For more information on companies in this article

Related Content

  • ERF invites Polish Road Congress’ perspective on Road Markings
    May 14, 2014
    On 5 March 2014, the Polish Road Congress organised a consultation seminar on road markings standards across the EU The conference followed the publication of the latest proposal by the ERF for an EU-wide intervention and maintenance policy for road markings, commonly known as 150x150. The proposed policy illustrates the ERF’s view that road markings should have a minimum width of 150mm for all roads, and their performance should not be allowed to drop below 150mcd/lux/m² (R3) in dry weather conditions a
  • New asphalt paving technology being unveiled
    October 28, 2016
    So far 2016 has been an important year for asphalt paver development, with a huge array of improved designs coming to market - Mike Woof writes. With both the World of Asphalt and bauma exhibitions during 2016, it is perhaps no surprise that a wide array of new asphalt pavers have been unveiled. Major manufacturers have introduced new models in both US and European configurations. Ammann, Atlas Copco, BOMAG, Caterpillar, LeeBoy, Roadtec, Vögele and Volvo CE have all launched new pavers, either in European o
  • ERF sets out sign inspection guidelines
    December 27, 2024
    The European Union Road Federation suggests that its checklist - downloadable for free - is included in any existing tools for road safety inspection and audits that road agencies may have.
  • The Road Ahead
    August 5, 2020
    According to recent figures, there are over 560,000 potholes that pose a risk of damage to vehicles in the UK alone, and the situation is similar in countries across the globe.