Skip to main content

Minimum noise requirement legislation is planned for electric and hybrid vehicles in the US

A new move by the US Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) could see hybrid and electric vehicles being required to meet minimum sound emissions standards. This would be so as to help make pedestrians more aware of the approaching vehicles and follows on from a Japanese study into the prevalence of accidents involving hybrid vehicles with pedestrians in urban areas. “Safety is our highest priority, and this proposal will help keep everyone using our nation’s
January 10, 2013 Read time: 3 mins
Electric vehicles such as this RUF model may require noise generators to improve safety for pedestrians when being driven at low speeds under planned US regulations
A new move by the 2364 US Department of Transportation’s 2467 National Highway Traffic Safety Administration (NHTSA) could see hybrid and electric vehicles being required to meet minimum sound emissions standards. This would be so as to help make pedestrians more aware of the approaching vehicles and follows on from a Japanese study into the prevalence of accidents involving hybrid vehicles with pedestrians in urban areas.  

“Safety is our highest priority, and this proposal will help keep everyone using our nation’s streets and roadways safe, whether they are motorists, bicyclists or pedestrians, and especially the blind and visually impaired,” said US Transportation Secretary Ray LaHood.

As electric and hybrid vehicles are quieter at low speeds, their approach is difficult to detect aurally. This is a particular issue for the blind, although many pedestrians also rely heavily on sound rather than using visual means to scan for approaching vehicles, before stepping into the roadway. The issue has come as something of a surprise to many extolling the virtues of electric and hybrid vehicles and who have either ignored or failed to understand the risks posed by the far lower sound emission levels.

But the proposed standard, Federal Motor Vehicle Safety Standard N. 141, would fulfill a mandate in the Pedestrian Safety Enhancement Act that hybrid and electric vehicles meet minimum sound requirements. This would ensure pedestrians are able to detect the presence, direction and location of these vehicles when they are operating at low speeds. “Our proposal would allow manufacturers the flexibility to design different sounds for different makes and models while still providing an opportunity for pedestrians,  bicyclists and the visually impaired to detect and recognize a vehicle and make a decision about whether it is safe to cross the street,” said NHTSA Administrator David Strickland.

The sounds would need to be detectable under a wide range of street noises and other ambient background sounds when the vehicle is traveling under 29km/h.  At speeds of 29km/h and above, vehicles make sufficient noise to allow pedestrians and bicyclists to detect them without added sound.  Each vehicle manufacturer would have a significant range of choices about the sounds it chooses for its vehicles, but the characteristics of those sounds would need to meet certain minimum requirements.  In addition, each vehicle of the same make and model would need to emit the same sound or set of sounds.

NHTSA estimates that if this proposal were implemented there would be 2,800 fewer pedestrian and pedalcyclist injuries over the life of each model year of hybrid cars, trucks and vans and low speed vehicles, as compared to vehicles without sound.

For more information on companies in this article

Related Content

  • Cosmic rays to monitor bridge condition
    January 2, 2025
    Cosmic rays can be used to monitor bridge condition.
  • New ice detection technology for motorists
    January 23, 2013
    A new technology developed by the VTT Technical Research Centre of Finland provides drivers with warnings of black ice on the roads. This automatic detection system will warn a driver in advance that a road is dangerous due to the presence of ice. According to VTT, this uses a novel, real-time method of obtaining information on road surface friction and employs data collected from the car’s in-built sensors. This compares the speeds of the drive shafts and axles in an array of driving conditions, with an al
  • Specifying barriers correctly for optimum roadway safety
    April 29, 2015
    Mike Dreznes, executive vice president at the International Road Federation (IRF) discusses the proper utilisation of longitudinal barriers as a road safety priority Road authorities have a duty of care to ensure infrastructure not only meets safety requirements but provides protection for all road users. Crash barriers play an essential role in maximising safety, lowering the risk of sudden impact for road users and also allowing redirective capabilities. If a road authority has a rigid hazard locate
  • Better road safety is the aim of a new study
    January 21, 2013
    A new study is calling for a more standardised approach for estimating the benefits of road safety initiatives. The aim of this is to save lives through the use of better road safety indicators. There is a clear need too. Almost 1.3 million people die in road crashes every year, and between 20 and 50 million are injured. Road traffic injuries are the leading cause of death among young people between 15 and 29 years of age. Road crashes cost countries around 1-3% of their GDP. In the face of these facts, the