Mantovanibenne shows redesigned shear

Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material. On display at bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm. The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening
January 6, 2017 Read time: 2 mins
Mantovanibenne’s new shears pierce the material before cutting.
1140 Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material  

On display at 688 Bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm.  

The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening, down to the SH25R for four to six tonne excavators with a maximum opening of 195mm.

Also on show is the company’s CRH440 cracker, with a patented triple booster pump design to increase the available crushing force. According to the company, the design is very powerful for its size and the double pivot design increases the jaw opening relative to the size of the unit.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 44293 0 oLinkExternal www.Mantovanibenne.com www.Mantovanibenne.com false /EasySiteWeb/GatewayLink.aspx?alId=44293 false false%>

For more information on companies in this article

Related Content

  • Sennebogen premieres 70tonne telescopic crane
    April 19, 2013
    Sennebogen has plugged the gap in its telescopic crawler crane range with the introduction of the 673R-HD. The 70tonne capacity machine sits between the firm’s 40 and 80tonne models, offering a 36m four-stage main boom with two fly booms of 8m and 15m. This gives a maximum reach of 51m. The 673R-HD is powered by a Stage IIIB/Tier 4 Interim standard Deutz engine delivering 160kW. Telescopic track frames allow for a maximum transport width of just 3m, with fast set-up on site as they extend out to provide sta
    Read More
  • Komatsu adds WA470 to its Dash-7 wheel loader range
    April 18, 2013
    Komatsu has unveiled its 23,590kg operating weight WA470-7 wheel loader, which offers improved efficiency, lower fuel consumption, improved operator comfort and enhanced serviceability. It is powered by a 203kW Stage IIIB/ EPA Tier 4I Komatsu SAA6D125E-6 engine, which is said to lower fuel consumption by 10% to 15% compared with the WA470-6. The engine is fitted with EGR, a hydraulically-actuated variable geometry turbocharger, and an automatically regenerating DPF. As with all Komatsu Stage IIIB machines,
    Read More
  • Leading Edge Attachments’ new Multi-Ripper Talon Bucket at Conexpo 2014
    January 6, 2017
    Leading Edge Attachments’ (LEA) new patented Multi-Ripper Talon Bucket, the latest addition to the Multi-Ripper SHARC product line, is being exhibited at Conexpo 2014. LEA Multi-Ripper products are said by the firm to be proven and much cheaper replacements for hammers, blasting and rock trenchers. Designed mainly for utility pipeline contractors, the new Multi-Ripper Talon Bucket works on the same principal as the award winning Multi-Ripper Bucket, except the bucket is very narrow, and the leading edges h
    Read More
  • CINTASA is offering an array of advanced conveyor systems
    January 6, 2017
    Spanish specialist CINTASA is aiming its new conveyor technologies at markets including quarrying and the cement sector. The firm’s latest tripper discharger and novel TEB vertical conveyor are said to offer proven and durable solutions for heavy duty applications.
    Read More

Highlighted Content