Mantovanibenne shows redesigned shear

Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material. On display at bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm. The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening
January 6, 2017 Read time: 2 mins
Mantovanibenne’s new shears pierce the material before cutting.
1140 Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material  

On display at 688 Bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm.  

The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening, down to the SH25R for four to six tonne excavators with a maximum opening of 195mm.

Also on show is the company’s CRH440 cracker, with a patented triple booster pump design to increase the available crushing force. According to the company, the design is very powerful for its size and the double pivot design increases the jaw opening relative to the size of the unit.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 44293 0 oLinkExternal www.Mantovanibenne.com www.Mantovanibenne.com false /EasySiteWeb/GatewayLink.aspx?alId=44293 false false%>

For more information on companies in this article

Related Content

  • JCB introduces compact telehandler that meets emission regulations
    January 6, 2017
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Dana’s TE30 extends powershift transmission offering
    January 6, 2017
    Dana Holding Corporation used bauma 2013 to reveal its Spicer TE30 powershift transmission for heavy-duty materials handling applications. With five forward and three reverse speeds, the TE30 slots into the range between the TE27 and TE32 transmissions, and is compatible with engines ranging from 225-300kW. The Spicer TE30 transmission benefits from several engineering refinements to improve efficiency. These include decreased spinning speeds of internal components to lower oil churning losses, optimised cl
    Read More
  • Dana’s TE30 extends powershift transmission offering
    April 17, 2013
    Dana Holding Corporation used bauma 2013 to reveal its Spicer TE30 powershift transmission for heavy-duty materials handling applications. With five forward and three reverse speeds, the TE30 slots into the range between the TE27 and TE32 transmissions, and is compatible with engines ranging from 225-300kW. The Spicer TE30 transmission benefits from several engineering refinements to improve efficiency. These include decreased spinning speeds of internal components to lower oil churning losses, optimised cl
    Read More
  • Hitachi’s new high production ZX870LCH-5 excavator
    February 8, 2013
    With an operating weight of 83.8 – 86tonnes, Hitachi’s giant ZX870LCH-5 excavator is said to be built to operate on the most demanding job sites, such as large-scale construction projects and in busy quarries. The model incorporates the HIOS IIIB hydraulic system, said to allow for faster operation with lower fuel consumption and increased front speed. The ZX870LCH-5 is claimed to have 6% more productivity in H/P mode compared to the previous Zaxis model. Swing torque is also said to have increased by 9% an
    Read More

Highlighted Content