Skip to main content

Mantovanibenne shows redesigned shear

Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material. On display at bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm. The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening
January 6, 2017 Read time: 2 mins
Mantovanibenne’s new shears pierce the material before cutting.
1140 Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material  

On display at 688 Bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm.  

The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening, down to the SH25R for four to six tonne excavators with a maximum opening of 195mm.

Also on show is the company’s CRH440 cracker, with a patented triple booster pump design to increase the available crushing force. According to the company, the design is very powerful for its size and the double pivot design increases the jaw opening relative to the size of the unit.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 44293 0 oLinkExternal www.Mantovanibenne.com www.Mantovanibenne.com false /EasySiteWeb/GatewayLink.aspx?alId=44293 false false%>

For more information on companies in this article

Related Content

  • Gradall adds to wheeled excavator range
    March 7, 2014
    Gradall has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN. The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to pr
  • Rockmore International brings A-series hammers to bauma
    April 19, 2013
    Rockmore International introduced its new A-series down-the-hole (DTH) hammers at bauma. The ROK 600A and 650A have been added to the company’s ROK range of hammers. The new 6inch-class (152mm) DTH hammers are the first models in the new A-class series. The A hammers feature new component designs that are said to demonstrate better performance and penetration rates suited to smaller compressors. “We are committed to developing new DTH hammer solutions that increase productivity and reduce drilling operatin
  • Our new screening buckets won’t clog, says Allu
    January 6, 2017
    Allu has added three new models to its range of screening buckets. The Allu DL series has been designed for excavators between 4 and 12tonnes and loaders between 2 and 8tonnes. The design of the DL series bucket’s top screen ensures that it won’t clog, even with wet materials, according to the manufacturer. The screening blades and top screens can be changed to vary the size of the end product, which is dependent on the spacing between the combs.
  • Our new screening buckets won’t clog, says Allu
    April 22, 2013
    Allu has added three new models to its range of screening buckets. The Allu DL series has been designed for excavators between 4 and 12tonnes and loaders between 2 and 8tonnes. The design of the DL series bucket’s top screen ensures that it won’t clog, even with wet materials, according to the manufacturer. The screening blades and top screens can be changed to vary the size of the end product, which is dependent on the spacing between the combs.