Mantovanibenne shows redesigned shear

Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material. On display at bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm. The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening
January 6, 2017 Read time: 2 mins
Mantovanibenne’s new shears pierce the material before cutting.
1140 Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material  

On display at 688 Bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm.  

The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening, down to the SH25R for four to six tonne excavators with a maximum opening of 195mm.

Also on show is the company’s CRH440 cracker, with a patented triple booster pump design to increase the available crushing force. According to the company, the design is very powerful for its size and the double pivot design increases the jaw opening relative to the size of the unit.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 44293 0 oLinkExternal www.Mantovanibenne.com www.Mantovanibenne.com false /EasySiteWeb/GatewayLink.aspx?alId=44293 false false%>

For more information on companies in this article

Related Content

  • Atlas and Mantsinen announce strategic partnership
    January 6, 2017
    German company Atlas Maschinen and Finnish group Mantsinen have formed a new strategic partnership that will include technical cooperation covering the manufacturing of hydraulic material-handling machines and R&D. Atlas has its head office in Delmenhorst and plants in Ganderkesee and Vechta, while Mantsinen’s principal place of business is in Ylämylly, Finland.
    Read More
  • Atlas and Mantsinen announce strategic partnership
    April 14, 2013
    German company Atlas Maschinen and Finnish group Mantsinen have formed a new strategic partnership that will include technical cooperation covering the manufacturing of hydraulic material-handling machines and R&D. Atlas has its head office in Delmenhorst and plants in Ganderkesee and Vechta, while Mantsinen’s principal place of business is in Ylämylly, Finland.
    Read More
  • Clean fuel solutions from Donaldson
    January 6, 2017
    Donaldson has redesigned its bulk fuel filtration system to create the i12 – an inline fuel manifold that is capable of holding 12 fuel filter cartridges. Capable of handling high flow rates and pressures – typically 150psi and in excess of 600gallons/minute – the i12 is part of Donaldson’s clean, protect and polish process, to improve fuel hygiene. With flanges on each end, the inline manifold design has been engineered to simplify installation where space is restricted around bulk tank inlets. The i12 al
    Read More
  • Clean fuel solutions from Donaldson
    March 7, 2014
    Donaldson has redesigned its bulk fuel filtration system to create the i12 – an inline fuel manifold that is capable of holding 12 fuel filter cartridges. Capable of handling high flow rates and pressures – typically 150psi and in excess of 600gallons/minute – the i12 is part of Donaldson’s clean, protect and polish process, to improve fuel hygiene. With flanges on each end, the inline manifold design has been engineered to simplify installation where space is restricted around bulk tank inlets. The i12 al
    Read More

Highlighted Content