Manitou renews mid-height range

Manitou has been showing three new models in its mid-height range of telescopic trucks. The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.
April 16, 2013 Read time: 1 min
Manitou has added new mid-height telescopic models
2106 Manitou has been showing three new models in its mid-height range of telescopic trucks.

The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.

The lifting height of the MT 835 is 7.75m, while the MT 1135 and MT 1335 can reach 11.05m and 12.55m respectively. Each has a nominal capacity of 3.5tonnes. Their maximum offsets range from 4.45m in the MT 835 to 8.75m for the MT 1335. Capacities at the maximum offset are between 1tonne and 1.15tonnes.

Manitou has chosen a Perkins engine for all three models to meet requirements for performance with a compact design.

An anti-leaning device is fitted as standard in the two larger models.

Other design features include a very small turning circle of 3.85m and a large ground clearance of 410mm. Manitou said the models have also been designed for comfort and ergonomics as well as ease of maintenance.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 47799 0 oLinkExternal www.manitou-group.com www.manitou-group.com false /EasySiteWeb/GatewayLink.aspx?alId=47799 false false%>

For more information on companies in this article

Related Content

  • Sennebogen premieres 70tonne telescopic crane
    April 19, 2013
    Sennebogen has plugged the gap in its telescopic crawler crane range with the introduction of the 673R-HD. The 70tonne capacity machine sits between the firm’s 40 and 80tonne models, offering a 36m four-stage main boom with two fly booms of 8m and 15m. This gives a maximum reach of 51m. The 673R-HD is powered by a Stage IIIB/Tier 4 Interim standard Deutz engine delivering 160kW. Telescopic track frames allow for a maximum transport width of just 3m, with fast set-up on site as they extend out to provide sta
    Read More
  • JCB introduces compact telehandler that meets emission regulations
    January 6, 2017
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Hydrema updates 912HM dump truck
    March 6, 2014
    Hydrema has revised its 912 range of articulated dump trucks, with a move from Perkins power to a Cummins Tier 4 Interim/Stage IIIB motor. The QSB4.5L engine delivers 105kW of power, up 8% on the previous model, but more importantly has 20% more torque, at 620Nm. Despite the increased output, Hydrema claims similar fuel consumption to the previous ADT line-up. The engine sits beneath a redesigned canopy that lifts clear of the chassis to provide easy access to the engine and driveline. The trucks also feat
    Read More
  • New wheeled loader is being offered by Dressta
    February 8, 2013
    Dressta is offering improved versions of its 560E and 555C Extra wheeled loaders, with new Cummins diesels. Power for the larger 560E Extra now comes from a Cummins QSX15 diesel rated at 319kW, compared with the 310kW of the previous engine in this machine. The six cylinder Cummins engine drives through a torque converter, a three-speed, full powershift, countershaft transmission, front and rear axle drives and conventional differentials.
    Read More

Highlighted Content