Manitou renews mid-height range

Manitou has been showing three new models in its mid-height range of telescopic trucks. The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.
April 16, 2013 Read time: 1 min
Manitou has added new mid-height telescopic models
2106 Manitou has been showing three new models in its mid-height range of telescopic trucks.

The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.

The lifting height of the MT 835 is 7.75m, while the MT 1135 and MT 1335 can reach 11.05m and 12.55m respectively. Each has a nominal capacity of 3.5tonnes. Their maximum offsets range from 4.45m in the MT 835 to 8.75m for the MT 1335. Capacities at the maximum offset are between 1tonne and 1.15tonnes.

Manitou has chosen a Perkins engine for all three models to meet requirements for performance with a compact design.

An anti-leaning device is fitted as standard in the two larger models.

Other design features include a very small turning circle of 3.85m and a large ground clearance of 410mm. Manitou said the models have also been designed for comfort and ergonomics as well as ease of maintenance.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 47799 0 oLinkExternal www.manitou-group.com www.manitou-group.com false /EasySiteWeb/GatewayLink.aspx?alId=47799 false false%>

For more information on companies in this article

Related Content

  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • LTM1750-9.1 all-terrain crane joins Liebherr line-up
    January 6, 2017
    Liebherr has developed the LTM1750-9.1, a nine-axle all-terrain crane with a maximum lift capacity of 750 tonnes. The 52m telescopic boom machine is carried by the machine and offers a 154m maximum lift height, with a maximum working radius of 112m. A luffing fly jib can be added in 3.5m increments to take maximum lift height to 91m. Weighing in at 108 tonnes in transport configuration, the LTM puts down 12 tonnes per axle. However if the machine’s boom supports are removed the crane can travel at 11 tonnes
    Read More
  • LTM1750-9.1 all-terrain crane joins Liebherr line-up
    February 7, 2013
    Liebherr has developed the LTM1750-9.1, a nine-axle all-terrain crane with a maximum lift capacity of 750 tonnes. The 52m telescopic boom machine is carried by the machine and offers a 154m maximum lift height, with a maximum working radius of 112m. A luffing fly jib can be added in 3.5m increments to take maximum lift height to 91m. Weighing in at 108 tonnes in transport configuration, the LTM puts down 12 tonnes per axle. However if the machine’s boom supports are removed the crane can travel at 11 tonnes
    Read More
  • Hamm is adding additional models to its HD+ asphalt compactor range
    January 6, 2017
    Hamm is widening its range of HD+ asphalt compactors to no less than 24 machines in all. Nine new models competing in the 7tonne and 8tonne classes are being added to the line-up, and which share the large, high visibility and ergonomic cabs with the existing machines in the HD+ range. Customers now have an array of choices from Hamm for the 7-14tonne asphalt compactor market, to suit particular applications or duties. Marketing director Gottfried Beer said, “For us it is important to offer the complete lin
    Read More

Highlighted Content