Manitou renews mid-height range

Manitou has been showing three new models in its mid-height range of telescopic trucks. The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.
April 16, 2013 Read time: 1 min
Manitou has added new mid-height telescopic models
2106 Manitou has been showing three new models in its mid-height range of telescopic trucks.

The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.

The lifting height of the MT 835 is 7.75m, while the MT 1135 and MT 1335 can reach 11.05m and 12.55m respectively. Each has a nominal capacity of 3.5tonnes. Their maximum offsets range from 4.45m in the MT 835 to 8.75m for the MT 1335. Capacities at the maximum offset are between 1tonne and 1.15tonnes.

Manitou has chosen a Perkins engine for all three models to meet requirements for performance with a compact design.

An anti-leaning device is fitted as standard in the two larger models.

Other design features include a very small turning circle of 3.85m and a large ground clearance of 410mm. Manitou said the models have also been designed for comfort and ergonomics as well as ease of maintenance.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 47799 0 oLinkExternal www.manitou-group.com www.manitou-group.com false /EasySiteWeb/GatewayLink.aspx?alId=47799 false false%>

For more information on companies in this article

Related Content

  • ZF chooses radial motor technology for its hydrostatic transmission
    January 6, 2017
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
    Read More
  • ZF chooses radial motor technology for its hydrostatic transmission
    April 18, 2013
    ZF has chosen a pair of radial hydraulic motors for use in its compact single-speed hydrostatic transmission, the 2HC85, which has been developed for compact wheeled loaders up to 100kW and 10.5tonnes operating weight. For high-torque start-up, the transmission sends oil to both motors and demands maximum stroke to travel from 0-16kph, before isolating one motor and then using 100% oil flow through the remaining motor to propel the machine to its maximum travel speed of 42kph. ZF said radial motors afford a
    Read More
  • Ammann showcases its most compact finisher
    February 6, 2013
    What Ammann describes as its most compact finisher, the 3.5tonne AFT 270 being showcased at bauma has been equipped with a new gas or electric-powered ramming and vibrating screed, said to ensure top quality finishing. With an operating weight of 5.2tonnes, the AFT 270 has finishing widths of 140 to 330cm and two operating concepts: standing operation on a pedestal and an operating platform with a sliding/rotating seat and operating console. Ammann says the AFT270, like all its finishers, comes with complet
    Read More
  • Ammann showcases its most compact finisher
    January 6, 2017
    What Ammann describes as its most compact finisher, the 3.5tonne AFT 270 being showcased at bauma has been equipped with a new gas or electric-powered ramming and vibrating screed, said to ensure top quality finishing. With an operating weight of 5.2tonnes, the AFT 270 has finishing widths of 140 to 330cm and two operating concepts: standing operation on a pedestal and an operating platform with a sliding/rotating seat and operating console. Ammann says the AFT270, like all its finishers, comes with complet
    Read More

Highlighted Content