Manitou renews mid-height range

Manitou has been showing three new models in its mid-height range of telescopic trucks. The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.
January 6, 2017 Read time: 1 min
Manitou has added new mid-height telescopic models
2106 Manitou has been showing three new models in its mid-height range of telescopic trucks.

The range has been simplified and the three models share the same chassis, boom, engine, transmission and hydraulics for ease of maintenance.

The lifting height of the MT 835 is 7.75m, while the MT 1135 and MT 1335 can reach 11.05m and 12.55m respectively. Each has a nominal capacity of 3.5tonnes. Their maximum offsets range from 4.45m in the MT 835 to 8.75m for the MT 1335. Capacities at the maximum offset are between 1tonne and 1.15tonnes.

Manitou has chosen a Perkins engine for all three models to meet requirements for performance with a compact design.

An anti-leaning device is fitted as standard in the two larger models.

Other design features include a very small turning circle of 3.85m and a large ground clearance of 410mm. Manitou said the models have also been designed for comfort and ergonomics as well as ease of maintenance.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 47799 0 oLinkExternal www.manitou-group.com www.manitou-group.com false /EasySiteWeb/GatewayLink.aspx?alId=47799 false false%>

For more information on companies in this article

Related Content

  • Lintec’s CSM 2500 plant offers low transport costs and quick assembly and disassembly
    February 12, 2013
    Lintec’s new CSM 2500 asphalt mixing plant with parallel drum and conventional screening machine will be on show at bauma. The parallel drum on the plant can be used for hot and cold recycling. Capable of producing 160tonnes/hour, the fully containerised configuration of the CSM 2500 is said by its German manufacturer to ensure lower transport costs and quick and efficient assembly and disassembly. The plant has six screening decks, a 60tonne capacity hot stone bin, a 45tonne reclaimed filler silo, produces
    Read More
  • INTERMAT launch for Ammann’s AF-350 asphalt pavers
    January 6, 2017
    AFW350 and AFT350 are the latest medium-sized asphalt pavers from Ammann and are said to offer good manoeuvrability in confined areas. The hydrostatically driven machines offer a paving width from 1.8-3.5metres and the output potential of up to 230tonnes/hour. A wide range of optional equipment is available to improve paver performance. These include a vibratory screed or a tamping/vibratory screed that can be heated with either gas or electricity, and automatic lighting and temperature control functions.
    Read More
  • INTERMAT launch for Ammann’s AF-350 asphalt pavers
    April 12, 2012
    AFW350 and AFT350 are the latest medium-sized asphalt pavers from Ammann and are said to offer good manoeuvrability in confined areas. The hydrostatically driven machines offer a paving width from 1.8-3.5metres and the output potential of up to 230tonnes/hour. A wide range of optional equipment is available to improve paver performance. These include a vibratory screed or a tamping/vibratory screed that can be heated with either gas or electricity, and automatic lighting and temperature control functions.
    Read More
  • Doosan increases safety articulated dump truck range
    January 6, 2017
    Doosan has increased safety on its articulated dump truck (ADT) range with the addition of a levelling meter that uses rotation sensors on the front and rear chassis sections to warn the operator of the possibility of a body rollover.
    Read More

Highlighted Content