Manitou introduces updated MRT rotating materials handlers

Manitou is updating its MRT rotating upperstructure telescopic handler range, with Stage IIIB engines, attachment recognition systems, automatic stability settings and adaptive load charts. Split into more basic Easy models, and the higher specification Privilege line, the MRT machines use a mix of Perkins and Mercedes-Benz engines. Attachments for the machines are fitted with a transponder that is recognised by the machine, adapting the load chart in the monitor to match the selected attachment’s capabilit
February 8, 2013 Read time: 1 min
2106 Manitou is updating its MRT rotating upperstructure telescopic handler range, with Stage IIIB engines, attachment recognition systems, automatic stability settings and adaptive load charts. Split into more basic Easy models, and the higher specification Privilege line, the MRT machines use a mix of 299 Perkins and 1195 Mercedes-Benz engines. Attachments for the machines are fitted with a transponder that is recognised by the machine, adapting the load chart in the monitor to match the selected attachment’s capabilities.

The system automatically calculates the safe working load and stability requirements for the attachment, allowing for partial stabiliser extension and turret angle. The MRT machines have revised glazing with a larger roof window, for improved visibility. They also come with an automatic parking brake, a new colour monitor in the cab and an eco mode for road transport.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Manitou-Group.com www.Manitou-Group.com false http://www.manitou-group.com/ false false%>

For more information on companies in this article

Related Content

  • Sophisticated weighing for loaders
    January 6, 2017
    Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
    Read More
  • One-touch chassis levelling and stabilisation for ROTO models
    January 6, 2017
    Italian manufacturer Merlo has developed an automatic chassis levelling and stabilisation system for its ROTO range of rotating telescopic handlers. Rather than using individual controls for each stabiliser leg, the operator pushes a button to both level the chassis and stabilise the machine for heavy lifting. This greatly reduces set-up time and increases safety.
    Read More
  • One-touch chassis levelling and stabilisation for ROTO models
    April 16, 2012
    Italian manufacturer Merlo has developed an automatic chassis levelling and stabilisation system for its ROTO range of rotating telescopic handlers. Rather than using individual controls for each stabiliser leg, the operator pushes a button to both level the chassis and stabilise the machine for heavy lifting. This greatly reduces set-up time and increases safety.
    Read More
  • High performance excavators from LiuGong
    January 6, 2017
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
    Read More

Highlighted Content