Skip to main content

Manitou introduces updated MRT rotating materials handlers

Manitou is updating its MRT rotating upperstructure telescopic handler range, with Stage IIIB engines, attachment recognition systems, automatic stability settings and adaptive load charts. Split into more basic Easy models, and the higher specification Privilege line, the MRT machines use a mix of Perkins and Mercedes-Benz engines. Attachments for the machines are fitted with a transponder that is recognised by the machine, adapting the load chart in the monitor to match the selected attachment’s capabilit
January 6, 2017 Read time: 1 min
2106 Manitou is updating its MRT rotating upperstructure telescopic handler range, with Stage IIIB engines, attachment recognition systems, automatic stability settings and adaptive load charts. Split into more basic Easy models, and the higher specification Privilege line, the MRT machines use a mix of 299 Perkins and 1195 Mercedes-Benz engines. Attachments for the machines are fitted with a transponder that is recognised by the machine, adapting the load chart in the monitor to match the selected attachment’s capabilities.

The system automatically calculates the safe working load and stability requirements for the attachment, allowing for partial stabiliser extension and turret angle. The MRT machines have revised glazing with a larger roof window, for improved visibility. They also come with an automatic parking brake, a new colour monitor in the cab and an eco mode for road transport.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Manitou-Group.com www.Manitou-Group.com false http://www.manitou-group.com/ false false%>

For more information on companies in this article

Related Content

  • Engcon improves tilt-rotator design
    April 19, 2012
    Engcon has introduced a new range of tilt-rotators, using a cast housing to greatly increase capacity. The EC218 and EC226 replace the EC15 and EC20 respectively. The former is suitable for machines up to 18tonnes in operating weight, while the latter is designed for excavators up to 26 tonnes. The cast housing incorporates internal lubrication channels for centralised greasing, reducing the risk of dust ingress or damage while operating. Larger bushes are used to reduce the chance of play in the housing
  • Mecalac 10MCR launched at INTERMAT
    April 13, 2012
    Following the success of its 8MCR high-speed compact excavator, Mecalac has developed a larger, heavier model, called the 10MCR. Like the smaller machine introduced in 2009, this new model combines the speed and manoeuvrability of a skid steer loader with the functionality of a midi excavator. Weighing in at nine tones and using a 75kW turbocharged diesel engine, the new model retains Mecalac’s MCR concept and uses a triangular track frame profile, which affords fast travel speeds in both directions usin
  • Mecalac 10MCR launched at INTERMAT
    January 6, 2017
    Following the success of its 8MCR high-speed compact excavator, Mecalac has developed a larger, heavier model, called the 10MCR. Like the smaller machine introduced in 2009, this new model combines the speed and manoeuvrability of a skid steer loader with the functionality of a midi excavator. Weighing in at nine tones and using a 75kW turbocharged diesel engine, the new model retains Mecalac’s MCR concept and uses a triangular track frame profile, which affords fast travel speeds in both directions usin
  • Sennebogen premieres 70tonne telescopic crane
    January 6, 2017
    Sennebogen has plugged the gap in its telescopic crawler crane range with the introduction of the 673R-HD. The 70tonne capacity machine sits between the firm’s 40 and 80tonne models, offering a 36m four-stage main boom with two fly booms of 8m and 15m. This gives a maximum reach of 51m. The 673R-HD is powered by a Stage IIIB/Tier 4 Interim standard Deutz engine delivering 160kW. Telescopic track frames allow for a maximum transport width of just 3m, with fast set-up on site as they extend out to provide sta