LTM1750-9.1 all-terrain crane joins Liebherr line-up

Liebherr has developed the LTM1750-9.1, a nine-axle all-terrain crane with a maximum lift capacity of 750 tonnes. The 52m telescopic boom machine is carried by the machine and offers a 154m maximum lift height, with a maximum working radius of 112m. A luffing fly jib can be added in 3.5m increments to take maximum lift height to 91m. Weighing in at 108 tonnes in transport configuration, the LTM puts down 12 tonnes per axle. However if the machine’s boom supports are removed the crane can travel at 11 tonnes
February 7, 2013 Read time: 1 min
718 Liebherr has developed the LTM1750-9.1, a nine-axle all-terrain crane with a maximum lift capacity of 750 tonnes. The 52m telescopic boom machine is carried by the machine and offers a 154m maximum lift height, with a maximum working radius of 112m. A luffing fly jib can be added in 3.5m increments to take maximum lift height to 91m. Weighing in at 108 tonnes in transport configuration, the LTM puts down 12 tonnes per axle. However if the machine’s boom supports are removed the crane can travel at 11 tonnes per axle for those countries with reduced allowance. Alternatively the boom can be removed completely if necessary, to reduce the crane’s travel weight to less than 40 tonnes.

Stand: F8.809

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Liebherr.com www.Liebherr.com false http://www.liebherr.com/ false false%>

 

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    January 6, 2017
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
    Read More
  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    March 27, 2013
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
    Read More
  • Intermat launch for Liebherr wheeled excavators
    January 6, 2017
    2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.
    Read More
  • Intermat launch for Liebherr wheeled excavators
    March 19, 2012
    2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.
    Read More

Highlighted Content