Skip to main content

Lombardini powers up the 8kW KD15-440

The Kohler/Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-e
January 6, 2017 Read time: 2 mins
Top class small engines like the 8kW KD15-440 will be on view at Lombardini
The 2278 Kohler/2277 Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-efficiency separator with pre-filter and an accumulated-dust drain valve in the filter itself. There is also a new fuel filter featuring additional pre-filter protection.

Further up the power chain, Lombardini will also show off a new line of Kohler Direct Injection (KDI) diesel engines, all of which have been prepared to meet the demands of the latest emissions regulations. This new and updated KDI series achieves clean diesel fuel combustion by using a high-pressure (2000 bar) common rail system of the latest generation, combined with an electronically triggered EGR valve that makes circulate the right amount of exhaust gases (which are liquid-cooled by a water/air heat exchanger). This, Lombardini claims, enables emission levels to comply with the new regulations while providing exceptional performance - and all without the use of after-treatment systems. There are three direct injection families, each with a different displacement rated at 1.9litres, 2.5litres, and 3.4litres, and each one is available in two different configurations: Mechanical injection to comply with Tier 3/Stage IIIA emission requirements; or common rail injection to comply with Tier 4/Stage IIIB emission requirements. The 1.9litre and the 2.5litre engines are already in production and a prototype 3.4litre unit will be on show at Bauma.

Stand: A4-402

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48843 0 oLinkExternal www.lombardini.it Lombardini Web false /EasySiteWeb/GatewayLink.aspx?alId=48843 false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Haver & Boecker is adding to its screen range with wire and polyurethane screen decks
    February 8, 2013
    Haver & Boecker is expanding its screen range with the addition of the Ty-Wire hybrid screen deck and of ultrasound screen decks. Ty-Wire hybrid screens use wire that is covered in polyurethane, providing a greater open area than a standard PU screen but with a lifetime that can be 4-6 times longer.
  • Scania get tough with Off-Road truck versions
    January 6, 2017
    To address the needs of the off-road market, Scania has added bigger non-slip steps, an additional step for windscreen cleaning and light guards to its off-road range of tractive units and multi wheelers. As an option the chassis can be supplied with factory-fitted PTO hydraulics and tank to power tipper rams or similar.
  • Scania get tough with Off-Road truck versions
    April 19, 2012
    To address the needs of the off-road market, Scania has added bigger non-slip steps, an additional step for windscreen cleaning and light guards to its off-road range of tractive units and multi wheelers. As an option the chassis can be supplied with factory-fitted PTO hydraulics and tank to power tipper rams or similar.
  • Sumitomo intends to boost its paver sales worldwide, as vice president international sales Ichiro Shimada explained
    January 6, 2017
    Sumitomo Construction Machinery intends to continue boosting export markets – a project that has been in hand for three years – according to vice president international sales Ichiro Shimada. “Sumitomo is dominant in Japan and we have 70% market share. But the market size is limited, maybe 400 units/year. We’re putting a lot of effort into the Chinese market,” said Shimada. Europe is another key market for Sumitomo and the firm is focussing on countries such as France, Poland and Switzerland, while it has a