L506C and L508C wheeled loaders join Liebherr’s compact line-up

Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
February 8, 2013 Read time: 1 min
Stability and performance are claimed for Liebherr’s new compact loaders
Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket.

Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinder is centrally mounted on the tapered boom for improved visibility to the working area. With pallet forks fitted both machines can lift in excess of 2 tonnes.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Liebherr.com www.Liebherr.com false http://www.liebherr.com/ false false%>

Related Content

  • Gradall adds to wheeled excavator range
    March 7, 2014
    Gradall has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN. The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to pr
    Read More
  • Sophisticated weighing for loaders
    January 6, 2017
    Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
    Read More
  • Gradall adds to wheeled excavator range
    January 6, 2017
    Gradall has taken the wraps off its largest wheeled excavator, the XL5300 III. The 23tonne machine has a reach of 10.3m and a maximum digging depth of 7.5m. Bucket breakout force is 113kN and the machine has a rated boom force of 111kN. The wheeled machine is capable of working to the front, the rear or over the side, without the need for outriggers or a dozer blade to provide stability. It has hydraulic drive motors powering both axles for full-time four-wheel drive. Both axles have wet disc brakes to pr
    Read More
  • Faresin shows upgraded telehandlers
    January 6, 2017
    Faresin Industries has expanded its telescopic handler range with the addition of the FH8.40 and the rotating Storm 22.45 evo. The FH8.40 sits in the range between the established FH7.45 and the FH9.30. The machine has a capacity of 4tonnes with a maximum lift height of 8m. Higher up the lifting scale, the Storm 22.45 rotating handler can manage up to 45tonne lifts, with a maximum height of 22m.
    Read More

Highlighted Content