L506C and L508C wheeled loaders join Liebherr’s compact line-up

Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
February 8, 2013 Read time: 1 min
Stability and performance are claimed for Liebherr’s new compact loaders
Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket.

Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinder is centrally mounted on the tapered boom for improved visibility to the working area. With pallet forks fitted both machines can lift in excess of 2 tonnes.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Liebherr.com www.Liebherr.com false http://www.liebherr.com/ false false%>

Related Content

  • Cat adds more K-series wheeled loaders at INTERMAT
    April 20, 2012
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
    Read More
  • Hidromek’s HMK200W wheeled excavator
    January 6, 2017
    Part of Hidromek’s crawler and wheel excavator range, the HMK200W wheeled excavator is designed with operator comfort, productivity, serviceability and safety in mind. It has a four-cylinder Isuzu engine, a top speed of 25.5km/h, a boom length of 5.8m, a 1m³ standard bucket capacity and a 21,800kg operating weight. The model has a dig depth of 5.93m.
    Read More
  • Hidromek’s HMK200W wheeled excavator
    April 12, 2012
    Part of Hidromek’s crawler and wheel excavator range, the HMK200W wheeled excavator is designed with operator comfort, productivity, serviceability and safety in mind. It has a four-cylinder Isuzu engine, a top speed of 25.5km/h, a boom length of 5.8m, a 1m³ standard bucket capacity and a 21,800kg operating weight. The model has a dig depth of 5.93m.
    Read More
  • INTERMAT 2012 sees JCB add 8026 CTS to mini excavator line
    January 6, 2017
    JCB is expanding its range of mini excavators with the launch of the 8026 CTS. The 8026 CTS joins the range alongside the zero tailswing 8025 ZTS in the line-up. The new 2.7tonne machine offers a conventional layout with a trailer-towable transport weight and increased lifting capacity. The 8026 CTS uses a dedicated boom and dipper arm for greater digging and lifting performance. Increased efficiency allows the 8026 CTS to use the same engine family as the 8025 ZTS, with a similar torque output, but with a
    Read More

Highlighted Content