L506C and L508C wheeled loaders join Liebherr’s compact line-up

Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
January 6, 2017 Read time: 1 min
Stability and performance are claimed for Liebherr’s new compact loaders
Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket.

Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinder is centrally mounted on the tapered boom for improved visibility to the working area. With pallet forks fitted both machines can lift in excess of 2 tonnes.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Liebherr.com www.Liebherr.com false http://www.liebherr.com/ false false%>

Related Content

  • Atlas Copco’s launches new drill rig FlexiROC T45
    February 12, 2013
    Atlas Copco is launching its new top hammer surface drill rig, the FlexiROC T45, along with its new rock drill COP 3060. The company says the new rig, which follows the ROC F9 before it, was to be built on a tried and trusted platform that would provide high-availability and a wide area of use for both large and small applications. Field studies are said to show that the FlexiROC T45 with folding boom, depending upon rock conditions, uses only half as much fuel as its predecessor the ROC F9 using the same
    Read More
  • Case’s new mid-excavator marvels unveiled at bauma
    January 6, 2017
    Case says the CX75C SR and CX80C, its new and claimed market first Tier 4 Final emissions standard midi-excavators, offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final requirements are said to have been met through the use of Cooled Exhaust Gas Recirculation (CEGR) combined with a Diesel Oxidation Catalyst (DOC) system. Case says there is no requirement for the two new mid-excavators to have a costly Diesel Particulate Filter (DPF), so there is no need for acti
    Read More
  • Case’s new mid-excavator marvels unveiled at bauma
    February 7, 2013
    Case says the CX75C SR and CX80C, its new and claimed market first Tier 4 Final emissions standard midi-excavators, offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final requirements are said to have been met through the use of Cooled Exhaust Gas Recirculation (CEGR) combined with a Diesel Oxidation Catalyst (DOC) system. Case says there is no requirement for the two new mid-excavators to have a costly Diesel Particulate Filter (DPF), so there is no need for acti
    Read More
  • Bobcat’s new E63 Compact Tail Swing excavator makes Conexpo debut
    January 6, 2017
    Following its summer 2013 launch, Bobcat’s Conexpo debut-making E63 Compact Tail Swing excavator is said to have better joystick controls, lift capacity, arm and bucket forces, and drive performance than previous models. Replacing the E60, the E63 is the second-largest machine in the company’s compact excavator family. The 6.3tonne excavator features a number of operator conveniences including a new blade float, multi-function joysticks, colour instrumentation panel and an auto-shift drive system.
    Read More

Highlighted Content