Kobelco’s new crawler cranes make European debut at INTERMAT

Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
April 20, 2012 Read time: 1 min
The new G series crawler cranes from Kobelco make their European debut at INTERMAT
2200 Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively.

Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduced from 2100 to 1750rpm.

Joysticks have become standard while levers remain an option, and the load monitoring and system control systems have been integrated into a single, bigger touch screen which doubles as a display for up to two CCTV cameras.

%$Linker: Asset 2 48413 0 oLinkExternal <span class="mouselink">www.kobelco-cranes.com</span> Kobelco Web false /EasySiteWeb/GatewayLink.aspx?alId=48413 false false%>

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Putzmeister’s new self-propelled pump can be quicker than a truck mount
    April 19, 2012
    Putzmeister’s new BSC 1409 D self-propelled concrete pump is designed for concreting drilled piles on unfinished surfaces and can deliver up to 85m3/hr at a pressure of up to 71bar. Powered by a 6-cylinder Deutz engine producing 129kW, the BSC 1409 D can travel at a maximum speed of 3.6km and does not need supports to be set up each time it moves.
    Read More
  • Hitachi’s new high production ZX870LCH-5 excavator
    February 8, 2013
    With an operating weight of 83.8 – 86tonnes, Hitachi’s giant ZX870LCH-5 excavator is said to be built to operate on the most demanding job sites, such as large-scale construction projects and in busy quarries. The model incorporates the HIOS IIIB hydraulic system, said to allow for faster operation with lower fuel consumption and increased front speed. The ZX870LCH-5 is claimed to have 6% more productivity in H/P mode compared to the previous Zaxis model. Swing torque is also said to have increased by 9% an
    Read More
  • Hatz will unveil the H series water-cooled 2.0-litre engine line at Bauma
    January 6, 2017
    Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
    Read More
  • Hatz will unveil the H series water-cooled 2.0-litre engine line at Bauma
    February 7, 2013
    Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
    Read More

Highlighted Content