Kobelco’s new crawler cranes make European debut at INTERMAT

Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
April 20, 2012 Read time: 1 min
The new G series crawler cranes from Kobelco make their European debut at INTERMAT
2200 Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively.

Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduced from 2100 to 1750rpm.

Joysticks have become standard while levers remain an option, and the load monitoring and system control systems have been integrated into a single, bigger touch screen which doubles as a display for up to two CCTV cameras.

%$Linker: Asset 2 48413 0 oLinkExternal <span class="mouselink">www.kobelco-cranes.com</span> Kobelco Web false /EasySiteWeb/GatewayLink.aspx?alId=48413 false false%>

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • Hyundai is launching a top of the range 120tonner
    January 6, 2017
    Hyundai is introducing a new top end excavator in the 100tonne-plus sector. The company says this endorses its commitment to large-scale investment in developing new products and new market opportunities. “Building on Hyundai’s experience with the successful 50-80tonne high capacity models, the all-new 120tonne R1200-9 has been conceived with an eye on the expanding worldwide mining and quarrying sector, where the demand for efficient, large-scale mass excavation in minerals extraction and overburden remova
    Read More
  • Hyundai is launching a top of the range 120tonner
    April 15, 2012
    Hyundai is introducing a new top end excavator in the 100tonne-plus sector. The company says this endorses its commitment to large-scale investment in developing new products and new market opportunities. “Building on Hyundai’s experience with the successful 50-80tonne high capacity models, the all-new 120tonne R1200-9 has been conceived with an eye on the expanding worldwide mining and quarrying sector, where the demand for efficient, large-scale mass excavation in minerals extraction and overburden remova
    Read More
  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More

Highlighted Content