JLG launches Stage IIIB range of telehandlers

JLG Industries has taken the wraps off a four-model range of powershift-equipped telehandlers. The 3706PS and 3707PS have a lift capacity of 3.7tonnes with maximum reach of 6.1m and 7.3m respectively. The larger 4014PS and 4017PS models have a 4tonne lift capacity, with a maximum reach of 14 and 17.3m. All four are powered by a 75kW Stage IIIB-compliant Deutz engine, driving through a four-speed powershift transmission.
April 18, 2012 Read time: 1 min
The JLG machines use Stage IIIB Deutz engines
RSS2199 JLG Industries has taken the wraps off a four-model range of powershift-equipped telehandlers.

The 3706PS and 3707PS have a lift capacity of 3.7tonnes with maximum reach of 6.1m and 7.3m respectively.

The larger 4014PS and 4017PS models have a 4tonne lift capacity, with a maximum reach of 14 and 17.3m. All four are powered by a 75kW Stage IIIB-compliant 201 Deutz engine, driving through a four-speed powershift transmission.

The four handlers have a ROPS/FOPS cab with improved visibility and optional air conditioning. A single revised joystick lever controls all boom functions along with auxiliary hydraulic controls in the lever head. As with other JLG telehandlers, the powershift machines have been designed to comply with the EN15000 standard, reducing the risk of the machine tilting forwards under overload conditions.

www.jlgeurope.com

View more videos

For more information on companies in this article

Related Content

  • Kobelco’s new crawler cranes make European debut at INTERMAT
    January 6, 2017
    Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
    Read More
  • Kobelco’s new crawler cranes make European debut at INTERMAT
    April 20, 2012
    Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
    Read More
  • Innovations in compact construction machines
    February 15, 2012
    2011 has already seen a host of new machine introductions among compact equipment makers, and we take a look at some of them in the utility sector With emissions legislation dominating the introduction of new machines over 130kW, smaller equipment has not been overlooked. Most firms have been working feverishly to produce quieter, more economical and more productive equipment and Japanese maker Takeuchi is a good example, having recently introduced a new 8.5 tonne midi excavator.
    Read More
  • JLG’s ‘green’ crawler booms
    January 6, 2017
    With working heights ranging from 14metres to 23metres, the five JLG Compact Crawler Booms feature a tracked wheel carriage and a narrow chassis for access through gates, yards, standard doorways and public buildings. The compact crawler booms are said to be low weight units drawing on an environmentally friendly combination of electric and combustion power for efficient energy use.
    Read More

Highlighted Content