JLG launches Stage IIIB range of telehandlers

JLG Industries has taken the wraps off a four-model range of powershift-equipped telehandlers. The 3706PS and 3707PS have a lift capacity of 3.7tonnes with maximum reach of 6.1m and 7.3m respectively. The larger 4014PS and 4017PS models have a 4tonne lift capacity, with a maximum reach of 14 and 17.3m. All four are powered by a 75kW Stage IIIB-compliant Deutz engine, driving through a four-speed powershift transmission.
April 18, 2012 Read time: 1 min
The JLG machines use Stage IIIB Deutz engines
RSS2199 JLG Industries has taken the wraps off a four-model range of powershift-equipped telehandlers.

The 3706PS and 3707PS have a lift capacity of 3.7tonnes with maximum reach of 6.1m and 7.3m respectively.

The larger 4014PS and 4017PS models have a 4tonne lift capacity, with a maximum reach of 14 and 17.3m. All four are powered by a 75kW Stage IIIB-compliant 201 Deutz engine, driving through a four-speed powershift transmission.

The four handlers have a ROPS/FOPS cab with improved visibility and optional air conditioning. A single revised joystick lever controls all boom functions along with auxiliary hydraulic controls in the lever head. As with other JLG telehandlers, the powershift machines have been designed to comply with the EN15000 standard, reducing the risk of the machine tilting forwards under overload conditions.

www.jlgeurope.com

View more videos

For more information on companies in this article

Related Content

  • Genie’s telehandlers reach new heights at INTERMAT
    April 19, 2012
    Two extended reach telehandlers have been added to Genie’s range with the introduction of the 14metre reach GTH4014 and the GTH4018, which can lift loads to 18metres. The 4tonne capacity Stage IIIB-compliant machines have streamlined chassis to improve the operator’s view of the load and are said to offer best-in-class performance from a smaller footprint. In addition to the small footprint, the machines have tight turning circles (3.8m outside turning radius on the GTH-4018) a narrow overall width, and a
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    January 6, 2017
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • JLG’s 340AJ and 1500SJ get European show debut at INTERMAT 2012
    January 6, 2017
    Making their first appearances at a major European construction show are the 340AJ and 1500SJ from aerial work platforms and telescopic material handler manufacturer JLG.
    Read More

Highlighted Content