JCB will exhibit two waste transfer machines in the 4CXWM and the JS20MH

JCB is adding to its waste handling range with the launch of the JS20MH materials handler and the 4CXWM wastemaster backhoe loader. The 20 tonne JS20MH is the firm’s first dedicated materials handler for the waste and recycling industries. Based on the JS160W Wastemaster wheeled excavator, the JS20MH uses a new undercarriage and chassis design with a central slew turret delivering increased stability. Powered by a 97kW (130hp) JCB Dieselmax engine the machine has a 5.7m straight boom with either a 4m goosen
January 6, 2017 Read time: 2 mins
Waste handling duo join JCB line-up
255 JCB is adding to its waste handling range with the launch of the JS20MH materials handler and the 4CXWM wastemaster backhoe loader. The 20 tonne JS20MH is the firm’s first dedicated materials handler for the waste and recycling industries. Based on the JS160W Wastemaster wheeled excavator, the JS20MH uses a new undercarriage and chassis design with a central slew turret delivering increased stability. Powered by a 97kW (130hp) JCB Dieselmax engine the machine has a 5.7m straight boom with either a 4m gooseneck dipper or a 3.6m materials handling dipper arm.

The 4CX Wastemaster backhoe loader is the first machine of its kind to be developed for the waste market. The machine has both front and rear stabiliser legs that can raise the chassis well clear of the ground. A wide range of hydraulic attachments allow the machine to be used inside waste bins for compact and materials handling duties, while a hook lift means that the machine can move bins and skips on site..

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.JCB.com www.JCB.com false http://www.jcb.com/ false false%>

For more information on companies in this article

JCB

Related Content

  • Doosan updates short-radius 14tonner
    January 6, 2017
    Doosan Construction Equipment has launched a Dash-3 version of its popular reduced-radius 15tonne excavator, the DX140LCR-3. Powered by a Cummins QSB4.5 Stage IIIB-compliant engine, with exhaust gas recirculation (EGR) and a diesel particulate filter (DPF), the machine has 10% more power and 15% more torque than the previous model. Both main boom and dipper arm forces get an 8% boost, while travel speeds are increased to 5.3km/h, resulting in a claimed a 10% increase in productivity.
    Read More
  • Doosan updates short-radius 14tonner
    April 16, 2013
    Doosan Construction Equipment has launched a Dash-3 version of its popular reduced-radius 15tonne excavator, the DX140LCR-3. Powered by a Cummins QSB4.5 Stage IIIB-compliant engine, with exhaust gas recirculation (EGR) and a diesel particulate filter (DPF), the machine has 10% more power and 15% more torque than the previous model. Both main boom and dipper arm forces get an 8% boost, while travel speeds are increased to 5.3km/h, resulting in a claimed a 10% increase in productivity.
    Read More
  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
    Read More

Highlighted Content