JCB will exhibit two waste transfer machines in the 4CXWM and the JS20MH

JCB is adding to its waste handling range with the launch of the JS20MH materials handler and the 4CXWM wastemaster backhoe loader. The 20 tonne JS20MH is the firm’s first dedicated materials handler for the waste and recycling industries. Based on the JS160W Wastemaster wheeled excavator, the JS20MH uses a new undercarriage and chassis design with a central slew turret delivering increased stability. Powered by a 97kW (130hp) JCB Dieselmax engine the machine has a 5.7m straight boom with either a 4m goosen
January 6, 2017 Read time: 2 mins
Waste handling duo join JCB line-up
255 JCB is adding to its waste handling range with the launch of the JS20MH materials handler and the 4CXWM wastemaster backhoe loader. The 20 tonne JS20MH is the firm’s first dedicated materials handler for the waste and recycling industries. Based on the JS160W Wastemaster wheeled excavator, the JS20MH uses a new undercarriage and chassis design with a central slew turret delivering increased stability. Powered by a 97kW (130hp) JCB Dieselmax engine the machine has a 5.7m straight boom with either a 4m gooseneck dipper or a 3.6m materials handling dipper arm.

The 4CX Wastemaster backhoe loader is the first machine of its kind to be developed for the waste market. The machine has both front and rear stabiliser legs that can raise the chassis well clear of the ground. A wide range of hydraulic attachments allow the machine to be used inside waste bins for compact and materials handling duties, while a hook lift means that the machine can move bins and skips on site..

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.JCB.com www.JCB.com false http://www.jcb.com/ false false%>

For more information on companies in this article

JCB

Related Content

  • Case’s new mid-excavator marvels unveiled at bauma
    January 6, 2017
    Case says the CX75C SR and CX80C, its new and claimed market first Tier 4 Final emissions standard midi-excavators, offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final requirements are said to have been met through the use of Cooled Exhaust Gas Recirculation (CEGR) combined with a Diesel Oxidation Catalyst (DOC) system. Case says there is no requirement for the two new mid-excavators to have a costly Diesel Particulate Filter (DPF), so there is no need for acti
    Read More
  • Case’s new mid-excavator marvels unveiled at bauma
    February 7, 2013
    Case says the CX75C SR and CX80C, its new and claimed market first Tier 4 Final emissions standard midi-excavators, offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final requirements are said to have been met through the use of Cooled Exhaust Gas Recirculation (CEGR) combined with a Diesel Oxidation Catalyst (DOC) system. Case says there is no requirement for the two new mid-excavators to have a costly Diesel Particulate Filter (DPF), so there is no need for acti
    Read More
  • L506C and L508C wheeled loaders join Liebherr’s compact line-up
    January 6, 2017
    Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
    Read More
  • L506C and L508C wheeled loaders join Liebherr’s compact line-up
    February 8, 2013
    Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
    Read More

Highlighted Content