JCB adds to Stage IIIB wheeled loader line

JCB has introduced two additional Stage IIIB-powered wheeled loaders, the 427 and the 437. Replacing the 426 and 436, the loaders use a Cummins QSB engine, which meets the requirements of Stage IIIB without the need for a diesel particulate filter or selective catalytic reduction (SCR). A variable geometry turbocharger improves response, while an optional five-speed powershift transmission with intelligent clutch cut-off system helps to reduce fuel consumption.
January 6, 2017 Read time: 1 min
The 437 offer improved performance with lower fuel consumption
RSS255 JCB has introduced two additional Stage IIIB-powered wheeled loaders, the 427 and the 437.

Replacing the 426 and 436, the loaders use a 196 Cummins QSB engine, which meets the requirements of Stage IIIB without the need for a diesel particulate filter or selective catalytic reduction (SCR).

A variable geometry turbocharger improves response, while an optional five-speed powershift transmission with intelligent clutch cut-off system helps to reduce fuel consumption.

An improved cab includes optional climate control for the first time, a full colour LCD monitor and a choice of lever layouts. Customers can also choose between standard open differential axles, limited slip diffs or an automatic diff lock on the front axle only.

www.jcb.com

Outside: 5 Stand: E002

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Tecnoidea’s high-beam design eases filter changes
    April 17, 2013
    Tecnoidea has introduced a plate press filtration plant with high-beam design, which is capable of working at pressures up to 16bar and said to speed the location of and replacement of breached filters. The modular design can have up to 100 pairs of filters to cope with flows up to 9,000lit/min and each pair has an individual drain, making it easier to locate breached filters. For ease and speed of replacing breached filter material, the high-beam design incorporates a handling system to remove the relevant
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    January 6, 2017
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • Caterpillar’s KO loader
    January 6, 2017
    The new redesigned Cat K Series Small Wheel Loaders—924K, 930K and 938K— being unveiled at Intermat 2012 are said to incorporate new Stage IIIB/Tier 4 Interim emissions standard engines and many new performance enhancing features. An efficient electronically controlled hydrostatic drive system, new optimised Z-bar loader linkage, refined operator's station and a choice of couplers and buckets for best matching the machine to the application are among the notable features on the debuting wheel loader models,
    Read More

Highlighted Content