JCB adds to Stage IIIB wheeled loader line

JCB has introduced two additional Stage IIIB-powered wheeled loaders, the 427 and the 437. Replacing the 426 and 436, the loaders use a Cummins QSB engine, which meets the requirements of Stage IIIB without the need for a diesel particulate filter or selective catalytic reduction (SCR). A variable geometry turbocharger improves response, while an optional five-speed powershift transmission with intelligent clutch cut-off system helps to reduce fuel consumption.
January 6, 2017 Read time: 1 min
The 437 offer improved performance with lower fuel consumption
RSS255 JCB has introduced two additional Stage IIIB-powered wheeled loaders, the 427 and the 437.

Replacing the 426 and 436, the loaders use a 196 Cummins QSB engine, which meets the requirements of Stage IIIB without the need for a diesel particulate filter or selective catalytic reduction (SCR).

A variable geometry turbocharger improves response, while an optional five-speed powershift transmission with intelligent clutch cut-off system helps to reduce fuel consumption.

An improved cab includes optional climate control for the first time, a full colour LCD monitor and a choice of lever layouts. Customers can also choose between standard open differential axles, limited slip diffs or an automatic diff lock on the front axle only.

www.jcb.com

Outside: 5 Stand: E002

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • New 40tonne ADT from Komatsu draws crowds at INTERMAT
    April 17, 2012
    The new HM400-3 articulated dump truck (ADT) from Komatsu can carry a full 40 tonnes and features a host of new technology in the drivetrain and in the cab. Its 353kW engine is fitted with a diesel particulate filter with computer-controlled regeneration so that no operator input is required. A computerised Transmission Control System replaces the need for limited slip differentials in the transmission as it activates the multi wet disc foundation brakes in any wheel that starts to spin. Furthermore, the s
    Read More
  • JCB introduces compact telehandler that meets emission regulations
    January 24, 2014
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More

Highlighted Content